Motorola QIP2500 Series manual Composite Video and S-Video

Page 19

QIP2500 User Guide

CONNECTING YOUR QIP2500

Composite Video and S-Video

Connect the set-top using composite Video or S-Video outputs for stereo audio if available on your TV.

Composite Video: Connect an RCA-type cable from the VIDEO port on the set-top to the VIDEO IN port on the TV.

OR

S-Video: Connect an S-Video cable from the S-VIDEOport on the set-top to the S-VIDEO IN port on the TV.

When connecting the video path, never connect baseband composite video and S-Video at the same time. Some entertainment equipment will not support both video inputs simultaneously.

13

Image 19
Contents User Guide QIP2500 Series Set-Top Terminal Repairs Important Safety Instructions Declaration of Conformity Regulatory InformationCanadian Compliance Software License Software LicenseContact Us QIP2500 User Guide Introduction Item Description Front PanelRear Panel QIP2500 User Guide Using the Remote Control Example only Electronic Program Guide Audio Output Modes Turning Power On and OffAdjusting the Volume Changing ChannelsAUDIO/VIDEO Connections Important Safety Considerations Recording Your Connections Standard TV Cabling Standard VCR Cabling Composite Video and S-Video Composite VCR Cabling Stereo Cabling VCR to Stereo Stereo Cabling TV to Stereo Baseband Cabling Dolby Digital Cabling Connectors do not carry Dolby DigitalTroubleshooting Page There is no video on the TV screen Mgbi