Motorola DSR405 manual If Your Three-Digit Code is not in the Tables Scanning

Page 19

Using Your Remote

If Your Three-Digit Code is not in the Tables (Scanning)

If you try to program your remote control using the three-digit codes, and the remote control does not work correctly, you may be able to find a code that works by using the "scanning" process.

1.Turn on the TV or the VCR-depending upon whether you wish to program the remote control for your TV or for your VCR.

2.Press the TV key (or VCR key) for at least three seconds or until the LED blinks.

3.The following steps explain how to "scan" through the TV (or VCR)

codes stored in your remote control using the		keys. (The LED will
not be lit while the	keys are depressed.
- While pointing the remote control at your TV (or VCR), press the
key to scan upward to the next code. (Use the		key to return to the5
previous code.)
- If the transmitted code is the correct one, your TV (or VCR) will turn
off, responding as if its POWER key were pressed.
- If your TV (or VCR) does not respond, depress the			key to try the

next code. Whenvyour TV (or VCR) turns onv6or off5as a result of the transmitted code, you will know that you have found the correct code.

- When you have found the correct code (power to your TV or VCR is toggled on or off), press the ENTER key. This will store the manufacturer’s code. The LED will then flash rapidly several times and turn off.

NOTE: If your TV is not listed in the tables and/or the codes for your brand are not accepted by the remote, you will need to use the remote originally manufactured for your unit.

Programming the Master Power Feature

If you wish to control the power on/off function of your satellite receiver, VCR, TV, and all connected equipment with a single press of the POWER key on your remote control, you can enable (or disable) the remote control’s Master Power feature by following these steps:

• Press the SAT key on the remote control for at least three seconds or until the light on the key blinks.

• Press the POWER key on the remote. The light will remain on steady. Press the power key a second time, and the light on the remote will blink on and off briefly, which indicates that the remote has accepted the Master Power command.

DSR405 User Guide

5

Image 19

Contents DSR405 Page Programming Copyright Notice FCC-Required Notification of ServiceTelephone Company Procedures Regulatory InformationFCC Certified If Problems AriseFCC Part Equipment Attachment Limitations User InstructionsImportant Safeguards Operation PrecautionsRegulatory Information Safeguard Instructions Vii Viii TOC Interactive Program Pay-Per-View Events Specifications Using Your Remote Key Functions Button then press play Programming the Remote Control If Your Three-Digit Code is not in the Tables Scanning Programming the Master Power FeatureIf You Have More Than One Satellite Receiver Verifying Your TV, VCR and AUX Mode CodesTV Codes To program AUX, press TV mode key Replacing the Remote Control BatteriesRemote Energy Saver Page Using Your Remote DVD Codes To program AUX, press VCR mode key Cable Boxes To program AUX, press VCR mode keyVCR Codes To program AUX, press VCR mode key Using Your Remote Page Front Panel Key Descriptions Using Your ReceiverPage Back Panel Connections Page Guidelines for Installing the System Yourself InstallationEquipment You May Need Overview of Pointing the Satellite Dish Assemble and Mount the Satellite DishInitial Adjustment to the Elevation Setting Initial Adjustment to the LnbfInitial Adjustment to the Compass Direction Setting Using the Menus Connecting the Satellite Dish, Receiver, and TVChoosing the Menu Language Acquiring a SignalYou can use Overview of Fine-Tuning Peaking the SignalFine-Tuning the Elevation Setting Fine-Tuning the Lnbf SettingFine-Tuning the Compass Direction Setting Authorizing Your Receiver Connections to Audio/Video Monitor and VCR Connections to Audio/Video MonitorViewing and Language Settings Additional FeaturesInstallation Settings Audio SettingsCaller ID System StatusTVPass Card Authorization ScreensWatching TV How to Select Menu OptionsHeaders Info Banner BannersCaller Announcement Banner Browse BannerPage How to Use the Guide How to Display the GuideInteractive Program Guide IPG Guide Screen How to Display a Future Day and Time on the GuideSetting a Timer for a Future Program How to View the Guide by InterestsDetailed Program Information Page Interests and Favorites How to Display and Use the Interests MenuPage Purchasing Instant Pay-Per-View Ippv Events Pay-Per-View EventsPurchase Screen How to Purchase an Ippv EventPurchase a Future Program How to Cancel a PurchaseHow to Purchase a Program While Viewing an Ippv Program Purchase the Next ProgramCredit Message How to Display Your Purchase HistoryLow Credit Message No Dial Tone Screen Unsuccessful Reportback Telephone Line BusyOptions How to Display and Use the Options MenuOpening Your Mail How to Display the Mailbox MenuMailbox Menu Mailbox Message Screen Setting a Future Day and Time for the GuideErase or Keep Message Screen How to Display the Favorite Channels Menu Setting Favorite ChannelsFavorite Channels Menu Parental Control Menu Options Setting Parental Controls & PasswordsHow to Display the Parental Control Menu To assign a channel to the Favorites A, B, C or D listChannel press the Enter Options How to Display the Timers Menu Setting TimersChange Timer/Erase Timer Prompt Screen How to Use the Timers MenuMaximum Number of Timers How to Use the Set Timer Menu Before a Timer ExecutesHow to Set Each Timer Option If You Press the GO Back Key How to Use the Confirm Timer MenuList Purchases Setting a Timer Using the GuideHow to Cancel a Timer If New Settings Conflict with Previous SettingsViewing and Language Settings Change System SettingsAudio Settings Installation Settings System Status Enter Names Call HistoryCaller Announcement Banner Input SpecificationsVideo DigiCipher II Digital System Remote ControlRemodulator Output Audio