Motorola HDT100 manual Auto Scan, To run auto scan

AUTO SCAN

Before you can start using the HDT100, you need to program it with the station numbers of the over-the-air digital TV stations available in your area. This can be done by simply running auto scan from the HDT100’s on-screen menu.

You can navigate the on-screen menu from the HDT100’s front panel or by using the remote control:

•Use the ! and "arrow keys to move up and down the on-screen menu

•Use the SELECT button to select the highlighted item on the on-screen menu

•Use the EXIT button to return to the main menu from a submenu or to leave the main menu

To run auto scan:

1Press the POWER button on the HDT100 front panel or remote control to turn on the receiver.

2Press MENU on the remote control or MENU/ENTER on the front panel. The Menu screen is displayed:

3Using the "arrow key, highlight Installation and press SELECT. The Password window is displayed.

18