Connections
Important information | AV receiver |
| ||
| AUDIO |
| ||
• Connect this unit as follows before using. Make connections according to the equipment you are | L | L | L | |
connecting. | ||||
R |
|
| ||
• Some settings of this unit may be necessary depending on the connection method. Check each | R | R | ||
|
|
| ||
connection item for more information.
• Select the cables (sold separately) according to the components being connected.
ENGLISH
Simple version
NOTE
•Do not plug in the power cord until all connections have been completed.
•When making connections, also refer to the operating instructions of the other components being connected.
•Be sure to connect the left and right channels properly (left with left, right with right).
•Do not bundle power cords together with connection cables. Doing so can result in noise.
VIDEO |
VIDEO IN |
COMPONENT |
VIDEO IN |
Y |
PB |
PR |
Basic version
Connecting an AV receiver
For connecting using an HDMI cable, see “Connect” (vpage 4). This section describes the connections not using an HDMI cable.
Connecting to an AV receiver with an analog
•This connection is recommended when the specifications of an AV receiver connected to the unit are as follows:
•Not supporting HDMI input
•Not supporting digital audio(coaxial) input
•Select the connector to use and connect the device.
Cables used for connections
Audio and Video cable
Audio and Video | (White) | L | L |
|
|
| |
cable | (Red) | R | R |
(Supplied) | (Yellow) |
|
|
| Video cable |
| |
Component video | (Green) |
|
|
|
|
| |
cable | (Blue) |
|
|
(Sold separately) | (Red) |
|
|
|
|
| |
9
Advanced version
Information