Marantz UD5005, 5411 10470 007M manual Network Setup, Dhcp

ENGLISH

Network Setup Default settings are underlined.

Set Internet connection settings and BD-LIVE settings.

Setting items	Setting details
Internet Connection	Enable : The Internet connection is to be used.
Sets whether the Internet	Disable : The Internet connection is not to be used.
connection is to be used
or not.
Information	Displays the network information shown below.
Displays the network	• Address type
information such as the IP	• IP Address
address, subnet mask, etc.	• Subnet Mask
	• Default Gateway
	• Primary DNS
	• Secondary DNS

	General Setting
Setting items	Setting details
Proxy Setting	Disable : Does not use a proxy server.
Setting for connecting to the	Enable : Uses the proxy server.
Internet via a proxy server.	• Proxy host: If Enable is selected for Proxy Setting, enter the proxy host
	from the virtual keyboard and press ENTER to register it.
	• Proxy port: If Enable is selected for Proxy Setting, enter the proxy port
	and press ENTER to register it.
	Network proxy input screen (with virtual keyboard)

General Setting

System	I
Language	a	b	c	d	e	1	2	3

Connection Test

Performs the network connection test.

Perform the Internet connection test.

•It is recommended to perform the connection test for the first Internet connection, or after the IP address or the settings for the network are changed.

•If connection is not completed, a message is displayed. Check the connection settings and connection environment.

	f	g		h	i	j	4		5		6
Ratings	k	l		m	n	o		7		8	9
	p	q		r	s	t		.		@	0
Network	u	v	w	x	y	z	!@#$
	Back			Space		Enter				Clear
Others
Select	ENTER		Confirm					RETURN			Exit

DHCP

Sets how to perform network configuration, automatically or manually.

Since the factory default setting is “Auto”, you do not need to set items such as the IP address if the DHCP server of the broadband router is set to “Enable”. Configure a proxy server if necessary.

Auto : Automatically configures the network via the DHCP function.

Manual : When connecting to a network that lacks the DHCP function, manually configure the following network settings. Consult with the ISP or your network administrator for what settings to make. After use i to clear value, use 0 – 9 to enter values and then press ENTER to finalize them.

•IP Address : Manually configure the IP address.

•Subnet Mask : If a xDSL modem or terminal adaptor is directly connected to the unit, enter the subnet mask provided by the ISP, usually in a document. Usually, “255.255.255.0” is set.

•Default Gateway : If the device is connected to a gateway (router), enter its IP address.

•Primary DNS : Enter the primary DNS.

•Secondary DNS : Enter the secondary DNS.

BD-LIVE Connection	Permitted : All Internet accesses from BD-LIVE are permitted.
Limits the access rights for	Partial Permitted : Internet accesses from the certified BD-LIVE are
the content on a BD-LIVE	permitted.
connection.	Prohibited : All Internet accesses from BD-LIVE are prohibited.

36

Remote control operation	Displaying the menu	Move the cursor	Decision the setting	Return to previous menu
buttons	Cancel the menu	(Up/Down/Left/Right)