Marantz UD5005, 5411 10470 007M manual Connecting an AV receiver

ENGLISH

Connecting to an AV receiver with a digital audio input terminal

•This connection is recommended when the specifications of an AV receiver connected to the unit are as follows:

•Not supporting HDMI input

•Supporting digital audio(coaxial) input

•This connection enables faithfully playing a disc that supports 5.1-channel output.

•Select the connector to use and connect the device.

Cables used for connections

Audio cable

Coaxial digital

cable(Black) (Sold separately)

Audio and Video cable

Audio and Video	(White)	L	L
cable	(Red)	R	R
(Supplied)	(Yellow)
	Video cables
Component video	(Green)
cable	(Blue)
(Sold separately)	(Red)

Connecting an AV receiver

AV receiver
AUDIO
COAXIAL
IN
	L	L
VIDEO	R	R
VIDEO IN

COMPONENT

VIDEO IN

Y

PB

PR

When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, this unit outputs Dolby Digital or DTS bitstream from its digital audio output terminal.

NOTE

•Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection.

When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 4).

•Super Audio CD’s DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output.

•Do not output DTS audio signals to an AV receiver that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers.

10