Marantz MAR0076 manual Use of the remote control

Operation

Picture format

Press this key repeatedly to select an other picture format: 4:3, Movie Expand 14:9, Movie Expand 16:9, with or without subtitles, SuperWide, WideScreen or AutoFormat.

(When AutoFormat is set to Yes in the Setup menu) AutoFormat makes to picture fill the screen as much as possible. Super Wide removes the black bars on the side of 4:3 program without causing apparent distortion.

When in Movie Expand 14:9 or 16:9 picture format, you can make subtitles visible with the cursor up/down in the “Cursor” control panel on the remote control.

Sometimes also video recorders programs carry special signals which automatically switch the TV into the correct format.

Note: in VGA mode press this key to switch between a 4:3, a 16:9 or Wide VGA picture format. In Dualscreen mode press this key to switch between a full or a squeezed picture format.

Bilingual choice and sound mode selection

•press this key to switch from Stereo to Mono sound, in case of stereo transmission or from Digital Sound to Digital Sound Available in case of digital

transmission.

•To choose between language I (Dual I) or language II (Dual II), in case of bilingual transmission.

The setting is separately stored for

English

Use of the remote control 0/9 digit keys

To select a TV channel

For a two digit program number, enter the second digit within 2 seconds.

				Previous program
				The previously selected TV
				channel is displayed.
				Control menu
				When this button in touched
				the control menu appears.
				The menu options shown can be
				selected and will open the
				specific commands related to the
			MUTE	mentioned funtionality.
				When selecting the “Power” a
			CHANNEL	special control panel appears.
				When selecting the “power off”
			TV
				option the option the set is
	1	2	3	switched off and the red indicater
				lights up in front of the receiver
			VOLUME	and the screen.
	4	5	6	To switch the TV on agian press
	7	8	9	either the “Power on” key, the
				Channel up (+) / down (-) or the
	i+	0	PP	digit keys in the “Keypad” control
				panel.
	Keypad
1/9	Sub +	Sub -		TV Text
				Dual screen			MUTE
						TV	CHANNEL
				Cursor
				Adjustments	Power on		VOLUME
				Settings	Power off
				Power	Power
				9/9	Sub +	Sub -
				Switch to...
				Keypad

each TV channel.

Permanent program number screen information

Press for 3 seconds to activate/de- activate the continuos display of the program number. Press briefly to display the information about the selected channel or external, it’s name, the sound mode, picture format setting, the selected DNR setting and remaining time set with the sleeptimer.

Select your computer or other peripherals

Press this key opens a special control panel to select EXT1, EXT2, EXT3, VGA or TV Channels according to where you connected your pripherals (see p. 25)

Remark: in VGA mode only some keys are valid (see VGA menu p.25)

MUTE

CHANNEL

TV

1VGA VOLUME

2 Front

3Scan

Go back

8/9 Sub + Sub -

Use of the remote control 1-9