TV Text
Dual screen
Cursor
Adjustments
Settings
Power
Switch to...
Keypad
MUTE
CHANNEL
TV
GY
VOLUME
OK
RB
Cursor
Sub + 
Sub -
Features menu
&Select “cursor” in the control panel menu on the remote control (TV mode)
ŽPress the yellow key to display/cancel the FEATURES menu.
ÒPress the cursor up/down to select a menu item.
ÔPress the OK key to activate.
OK
FEATURES
Select / Adjustments
Activate
Sleeptimer
Child Lock
Headphone PP store
Message
Timers
Sleeptimer
With the sleeptimer you can set a time period after which the TV should switch itself to standby.
The counter runs from Off up to 180 min.
One minute before the TV is set to go to standby, the remaining seconds and the message Good Night appear on screen. You can always switch off your set earlier or change the set time.
Note: when a VGA source is selected, the TV will not go to standby when the sleeptimer expires.
Child lock
If the child lock is on, the TV can only be switched on with the remote control. The PROGRAM - and + keys and VOLUME - or + keys behind the front door of the receiver cannot be used. In this way you can prevent unauthorised use of your TV. Also no automatic switching to connected equipment will occur.
If the message Child lock On appears, the child lock must be switched off before you can use the PROGRAM - and + keys and the VOLUME - or + keys on the receiver.
Headphone PP store
The Volume and Balance in the headphone menu can be stored in memory for all TV channels.
Message
Message
...........................
...........................
MESSAGE Change
Clear
Type
Run
With this function you can enter a personal message on 2 lines which will be displayed automatically when the set is switched on.
For example: I’ll be late this evening. Don’t wait for dinner.
Change
Press the OK key to start entering the message.
Select with the cursor up/down the letter or number you want to enter. Select with the cursor right the next position.
Press the OK key when you have entered the complete message.
Clear
Press the OK key to remove a previous message.
Type
Press the cursor left/right to select the way the message will be displayed: Wipe, Slide, Fall or Fade.
The Fade display is a randomly selection of the three other display types.
Run
Press the cursor left/right to select the display frequency: Continuous, Once or No.