![](/images/new-backgrounds/1125369/12536943x1.webp)
English
Connect your computer
MAINS INLET | L |
AUDIO IN | AUDIO OUT |
VGA OUT
&Connect one end of a VGA cable supplied to the video card of the
computer and the other end to the VGA MONITOR IN connector at the rear side of the receiver box or at the VGA IN connector 1 at the back of the monitor in case you have no receiver box connected to the monitor.
See the instructions with the monitor.
ŽFix the connectors firmly with the screws on the plug.
Connect your Apple Macintosh* computer
VGA IN
R
2 |
1 2
Attention: Macintosh computers with separate H and V synchronisation signals can be used together with a switchable adaptor. Macintosh computers with Composite Sync and Sync on Green signals may need another special adaptor or cable. Contact your dealer.
&Connect a switchable adaptor for Apple video connectors to one end of a VGA cable.
ŽPut the DIP switches on the adaptor in the following positions :
1 | 2 | 3 | 4 |
off | off | on | on |
ÒConnect the end of the VGA cable with the adaptor to the video card of the computer and the other end to the VGA MONITOR IN connector on the back of the receiver box or at the VGA IN connector on the back of the monitor in case you have no receiver box connected.
ÔScrew the connectors down firmly.
a |
|
To reproduce computer screen information and/or programmes, see p. 25.
Note:The adaptor shown is not supplied with this set. Please contact your dealer for more information.
*Apple Macintosh is a registered trademark of Apple Computer, Inc.