CABLE 
14
2
EXTERNAL | |
1 | 2 |
5
3
Video recorder and other peripherals
&Connect the aerial cables 1, 2 and 3 as shown opposite. Better
picture quality can be obtained if you also connect eurocable 5 to EXTERNAL 2 and a eurocable 4 to EXTERNAL 1 or 3.
Ž Look for the test signal of your peripheral in the same way as you do for |
a video recorder. |
When a video recorder is connected to EXTERNAL 1 you can only record a |
programme from your TV. |
Only when a video recorder is connected to EXTERNAL 2 it is possible to |
record a programme from your TV as well as from other connected |
equipment. See Record with your video recorder, p. 26. |
Note: EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS, Y/C and |
VCR 1
RGB, EXTERNAL 3 only CVBS. |
| AUDIO | |
L | R | VIDEOS•VHS |
1 2 3
n
Camera & camcorder
&Connect your camera or camcorder at the front side of your receiver.
ŽConnect the equipment to VIDEO 2 and AUDIO L 1 for mono equipment.
ÒFor stereo equipment also connect AUDIO R 1.
Headphone
Insert the plug into the headphone socket L at the front side of the receiver.
The headphone impedance must be between 8 and 2000 Ohm. The headphone socket has a 3.5 mm jack.
In the SOUND menu select Headphone to adjust the headphone volume and balance and to select the audio source for your headphone sound. See p. 14.