Memorex MT2251 owner manual Location of Controls Closed Caption, Setting Language, TV Operation

LOCATION OF CONTROLS CLOSED CAPTION

1 2 3 4

1.Power Button - Press to turn the TV on or off.

2.Volume ▲/▼ Buttons - Press to raise or lower the volume of the sound.

(MENU Buttons) - Press the both button to display the On- Screen menu function. (SET+/– Buttons) -Press the select the desired setting during On-Screen operations.

3.Channel ▲/▼ Buttons - Press to select a higher or lower numbered channel set into memory.

(ENTER Buttons)- Press to enter or select information for On-Screen operations.

(RESET Buttons) - Press to reset the On-Screen picture adjustments to their factory preset positions.

4.Remote Sensor - Signals from the Remote Control unit are received here.

SETTING LANGUAGE

This TV can display the channel number, on screen displays and picture adjustments on the screen in English, Spanish or French.

On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select language to use the other menu options.

1	Press the MENU button.	MENU
			CH SET
			PICTURE
2	Press the SET + or – button to select the LANGUAGE		LANGUAGE
			V-CHIP SET
	mode, then press the ENTER button.	PRESS : + / – / ENTER / MENU
3	Press the SET + or – button until the " " indicator
	points to the desired language: English (ENGLISH),	LANGUAGE / LENGUA / LANGUE
	Spanish (ESPAÑOL) or French (FRANCAIS), then		ENGLISH
	press the ENTER button.		ESPAÑOL
			FRANCAIS
		PRESS : + / – / ENTER / MENU
4	Press the MENU button again.

NOTE:

If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text will not be affected by the language selection.

TV OPERATION

1	To turn on the TV, press the POWER button.
	The Volume can be adjusted to a desired level by pressing the VOL (VOLUME) ▲ or ▼
2
	button.
	The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER.
	As the sound level increases, so do the number of BARS AND THE NUMBER on the
	screen. The same is true for decreasing the level.
3	Set the TV/CATV menu option to the appropriate position. When shipped from the
	factory, this menu option is in the CATV setting. See "To Memorize Channels".
	TV - VHF/UHF channels
	CATV - CABLE TV channels
	CH (CHANNEL) ▲ and ▼ buttons
4
	Press and release the CH (CHANNEL) ▲ or ▼ button. The channel automatically stops
	at the next channel set into memory. Press and hold the button down to change channels
	more quickly.
	For proper operation, before selecting channels, they should be set into the TV's
	memory. See "To Memorize Channels".
	DIRECT CHANNEL SELECTION buttons (0-9) - Press these buttons to select a
	channel.The channel number will appear on the upper right corner of the TV screen. If an
	invalid channel number is selected, the display will revert to the original channel.
	TV MODE DIRECT CHANNEL SELECTION - When the TV/CATV menu option is in the
	TV position, all channels can be instantly selected by using two buttons. (For example, to
	select channel 2, press "0", then "2". If you press only "2", channel selection will be
	delayed for a few seconds). For channels 10 and above, press the 2 digits in order.
	NOTE FOR CHANNELS 1-19:
	If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 4
	seconds.
	CATV mode direct channel selection -
	When the TV/CATV menu option is in the CATV position, channels can be selected as
	follows:
	1-9	Press "0" twice, then 1-9 as needed.
		(Example, to select channel 2, press 002)
	10-19	Press "0", then remaining 2 digits.
		(Example, to select channel 13, press 013).
	20-99	Press the 2 digits in order.
		(Example, to select channel 36, press 36).
	100-125	Press the 3 digits in order.
		(Example, to select channel 120, press 120).

NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes.

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

CLOSED CAPTIONING WITH A VCR

Closed Captioned programs can be recorded and played back on a VCR with the Closed Captioned text intact. The Closed Captioned text will disappear during Cue (Fast Forward Search), Review (Rewind Search) and Pause Modes or if the VCR tracking is not adjusted properly.

Captions: This Closed Caption Mode will display text on the screen in English or another language (depending on the setting of the Closed Captions CH. 1/2 button). Generally, Closed Captions in English are transmitted on Captions Channel 1 and Closed Captions in other languages are transmitted on Captions Channel 2.

Text: The Text Closed Caption Mode will usually fill 1/3 of full screen with a programming schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial or a break in the signal, the Captions will reappear when the signal is received again. If the channels are changed, the Captions will be delayed approximately 10 seconds.

The Captions will appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen. News programs will usually show three-line Closed Captions which scroll onto the screen. Most other shows provide two or three lined Captions placed near the character who is speaking so the viewer can follow the dialogue.

Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words that are sung usually appear enclosed by musical notes.

For television programs broadcasting with Closed Captions, look in your TV guide for the Closed Captions symbol (CC).

•When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen.

•Closed Captioned text is only displayed in locations where it is available.

•If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

•Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed Captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

•When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with Closed Captions.

•Some cable systems and copy protection systems may interfere with the Closed Captioned signal.

•If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

SETTING V-CHIP

This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions.

1	Press the SET + or – button to select the V-CHIP SET option, then press the ENTER button.
2	Enter your password using the Direct channel selection buttons.
	In the event of entering incorrect password press the RESET button. Then press the
	ENTER button.
3	Enter the same password for confirmation, then press the ENTER button.
	Press the SET + or – button to select the V-CHIP option.
4
	Press the ENTER button to select the ON.
5	Press the SET + or – button to select the TV RATING or MOVIE RATING option. Press
	the ENTER button.
6	Press the SET + or – button to select the desired rating for the applicable video or TV
	channel. Press the ENTER button.
	TV RATING		SET –	SET +
	OFF	TV–Y	TV-Y7	TV-G	TV-PG	TV-14	TV-MA
	TV-Y : all children				TV-PG : parental guidance
	TV-Y7 : 7 years old and above				TV-14 : 14 years old and above
	TV-G : childrens program				TV-MA : 17 years old and above

When you select TV-Y7, TV-PG, TV-14 or TV-MA, press the CALL button to show the contained rating.

Press the SET + or – button to select the the desired item you want. Press the ENTER button to select the OFF.

MOVIE RATING

				SET –	SET +
	OFF		G	PG	PG-13	R	NC-17	X
G	: all ages				R	: under 17 years old parental
PG	: parental guidance					guidance suggested
PG-13 : parental guidance					NC-17 : 17 years old and above
		less than 13 years old			X	: adult only

7 Press the MENU button three times to return to normal TV viewing.

NOTES:

•The V-Chip function is activated only on programs and tapes that have the rating signal.

•Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content of the show. When the program starts, the "ENTER PASSWORD" will appear on the screen. When you want to release the V-Chip temporarily, enter the password.

If you change the channel or turn off and on the TV while releasing the V-Chip temporarily, the V-Chip setting will be resumed.

•When you watch the TV from the cable box or the VCR with the RF Modulator, then you release the V-Chip temporarily, the V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case.

•When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program appears.

3I0-0101A E 4 1/1/32, 09:50