TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting.
TV/CATV SELECTION
ADJUSTING PICTURE
You can adjust the settings for color, sharpness, contrast, brightness and tint.
1 | Press the MENU button. |
|
|
2 | Press the SET + or – button until the indicator next to "PICTURE" begins |
| to flash, then press the ENTER button. |
|
|
3 | Press the ENTER button repeatedly to select the item you want to adjust. |
1
2
3
4
Press the MENU button.
Press the SET + or – button until the indicator next to "CH SET" begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "TV/CATV" begins to flash.
Press the ENTER button to select the TV or CATV mode. The arrow indicates the selected mode.
MENU
CH SET
PICTURE
LANGUAGE
PRESS : + /
TV 
CATV
AUTO CH MEMORY
ADD / DELETE
PRESS : + /
|
| BRIGHTNESS | CONTRAST COLOR | TINT | SHARPNESS | |||
|
|
|
|
|
|
| ||
|
| Press the SET + or – button to adjust the setting. |
|
|
| |||
4 |
|
|
| |||||
|
|
|
|
|
|
|
| |
|
|
|
| + |
| – | ||
|
|
|
|
|
| |||
|
| BRIGHTNESS | increase brightness | decrease brightness | ||||
|
|
|
|
|
| |||
|
| CONTRAST | increase contrast | decrease contrast | ||||
5 Press the MENU button twice to return to normal TV viewing.
The chart below is typical of many cable system channel allocations.
CATV CHART
Number on this TV |
|
|
|
|
| 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | |||
Corresponding CATV channel |
|
|
| A | B | C | D | E | F | G | H | I | |||||
23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 |
J K L M N O P Q R | S T U V W AA BB CC DD | ||||||||||||||||
41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 |
EE | FF | GG | HH | II | JJ | KK | LL | MM | NN | OO | PP | RR | SS | TT | UU | VV | |
59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 |
WW AAA BBB CCC DDD EEE | FFF GGG HHH | III | JJJ | KKK | LLL | MMM NNN OOO PPP QQQ | |||||||||||
77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 |
RRR SSS | TTT UUU VVV WWW XXX YYY | ZZZ | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | ||||||
95 | 96 | 97 | 98 | 99 | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 |
100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 | |||||
113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | 121 | 122 | 123 | 124 | 125 | 01 |
|
|
|
|
113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | 121 | 122 | 123 | 124 | 125 | 5A |
|
|
|
|
NOTE: Contact your cable company to determine the type of cable system used in your area.
COLOR | brilliant color | pale color | |
TINT | greenish color | reddish color | |
|
|
| |
SHARPNESS | makes picture | makes picture softer | |
clearer | |||
|
|
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode appears
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS | POSSIBLE SOLUTIONS |
| • Make sure the power cord is plugged in. |
AUTOMATIC CHANNEL MEMORY
1 Press the MENU button.
2 Press the SET + or – button until the indicator next to "CH SET" begins to flash, then press the ENTER button.
3 Press the SET + or – button until the indicator next to "AUTO CH MEMORY" begins to flash, then press the ENTER button. The TV will begin memorizing all the channels available in your area.
4 Press the MENU button twice to return to normal TV viewing.
MENU
CH SET
PICTURE
LANGUAGE
PRESS : + /
TV 
CATV
AUTO CH MEMORY
ADD / DELETE
PRESS : + /
TV does not operate | • Try another AC outlet. | |
| • Power is off, check fuse or circuit breaker. | |
| • Unplug unit for an hour, then plug it back in. | |
|
| |
Poor sound or No sound | • Station or CATV experiencing problems, tune to another station. | |
• Check sound adjustments (Volume and Muting). | ||
| ||
| • Check for sources of possible interference. | |
|
| |
| • Station or CATV experiencing problems, tune to another station. | |
Poor picture or No picture | • Check antenna or CATV connections, adjust antenna. | |
• Check for sources of possible interference. | ||
| ||
| • Check picture control adjustments. | |
|
| |
Poor reception on some | • Station or CATV experiencing problems, tune to another station. | |
• Station signal is weak, adjust antenna to receive weaker station. | ||
channels | ||
|
TO ADD/DELETE CHANNELS
1 | Press the MENU button. |
|
|
|
| MENU | |
|
|
| CH SET |
2 | Press the SET + or – button until the indicator next to "CH SET" |
| PICTURE |
| |||
| |||
| begins to flash, then press the ENTER button. |
| LANGUAGE |
|
| ||
|
| ||
|
|
| |
|
| PRESS : + / | |
| • Check for sources of possible interference. | |
|
| |
| • Station or CATV experiencing problems, tune to another station. | |
Poor color or no color | • Make sure channels are set into memory. | |
• Check picture control adjustments. | ||
| ||
| • Check antenna or CATV connections, adjust antenna. | |
| • Check for sources of possible interference. | |
|
| |
| • Station or CATV experiencing problems, tune to another station. |
3 Press the SET + or – button until the indicator next to "ADD/ DELETE" begins to flash, then press the ENTER button.
4 Select the desired channels to be memorized or deleted using the Direct Channel Selection buttons (10 keys,
▼button or the SET + or – button.
5 Press the ENTER button to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the channel indication will be red. Press the ENTER button if you wish to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is added and the channel will be memorized.
If a memorized channel was selected (step 4), the channel indication will be green.
Press the ENTER button if you wish to DELETE the channel from memory. The channel indicator will change from green to red when a channel is deleted.
Repeat Steps 4 and 5 for each channel to be added or deleted.
6 Press the MENU button three times after adding or deleting all of the desired channels, to return to normal TV viewing.
TV 
CATV
AUTO CH MEMORY
ADD / DELETE
PRESS : + /
ADD | CH 012 |
PRESS : + /
Picture wobbles or drifts | • Make sure channels are set into memory. | |
| • CATV company is scrambling signal. | |
| • Check antenna adjustment. | |
|
| |
No CATV reception | • Check all CATV connections. | |
• Set TV/CATV menu option to the CATV mode. | ||
| • Station or CATV system problems, try another station. | |
|
| |
Horizontal or diagonal | • Check antenna connections, adjust antenna. | |
bars on screen | • Check for sources of possible interference. | |
|
| |
No reception above | • Make sure TV/CATV menu option is in the appropriate mode. | |
channel 13 | • If using antenna, check UHF antenna connections. | |
|
| |
| • Batteries are weak, dead or inserted incorrectly. | |
No Remote operation | • Remote is out of range, move closer to TV within 15 feet. | |
• Make sure Remote is aimed at sensor. | ||
| ||
| • Confirm there are no obstructions between the Remote and the TV. | |
| • Make sure the power cord is plugged in. | |
|
| |
TV shuts off | • No broadcast on station tuned. | |
• Sleep Timer is set. | ||
| • Power interrupted. | |
|
| |
| • TV station experiencing problems or program tuned is not closed | |
Closed - Caption is not | captioned. Try another channel. | |
• Check CATV connection or VHF/UHF antenna, reposition or rotate | ||
activated. | ||
antenna. | ||
| ||
| • Press TV/CAPTION/TEXT button to turn on the closed caption de- | |
| coder. | |
|
| |
Display is not shown in | • Select proper language in the menu options. | |
your language. |
|
5 | 1/1/32, 09:51 |