Meridian America 562V.2 manual Choosing standard settings, To select a standard setting

Choosing standard settings

without a computer

The 562V.2 Multimedia Controller provides the following six alternative standard settings, called Types, which configure all aspects of the multimedia controller into the six most commonly needed configurations:

Type Description

1	Main room 500-Series operation with no DAC module
	(default).

To select a standard setting

●Switch off any power amplifiers that are connected to the multimedia controller.

●Turn off the multimedia controller, using the power switch on the back panel.

●Turn on the power again while holding down the Off key on the front panel.

controller

2	200-Series operation for a system with a 200-Series
	CD player.

The display will show:

Type

6	200-Series operation for a system without a 200-Series
	CD player.
7	Second-room system using a digital feed into D1.

It will then show:

Ty 1

Configuring the multimedia

28

8	Second-room system using an analogue feed into A5.
9	Main room 500-Series operation using a DAC module
	for analogue tape.

The Types are numbered for consistency with the original 562V.

Choosing one of the six standard settings overrides any other configuration you may have performed, and so can be used to reset the configuration of the multimedia controller.

●Press V or A to change the type number.

For example, to select Type 9	Ty 9
the display shows:

●Turn off the multimedia controller using the power switch on the back panel.

●Turn on again to use the standard settings you have selected.