8. Installation 
2.Symbol Rate
1.Select Symbol Rate using the / button and press the OK or button.
2.Select the symbol rate value using the / button and press the OK button.
3.When you select User Dene to set symbol rate manually, enter symbol rate value using the
3.Network Search
1.Select Network Search using the / button and press the OK or button.
2.Select Enable/Disable using the OK or button.
Note: Enable allows you to use Network ID.
4. Search
You can complete the setting and start searching.
1.Select Search and press the OK button to start manual search.
2.The next procedures are similar to those for the automatic search. Please refer to 8.1 Automatic Search.
GB48
User’s Manual