Humax CX-FOX C II manual Default Setting

8. Installation

8.4 Default Setting

Default Setting restores the product to the default settings.

Warning: Please note that once you perform the default setting, all data such as the channel list and user con￿gured data are deleted.

1.Press the MENU button.

2.Select Installation using the / button and press the OK or  button.

3.Enter the password using the NUMERIC(0-9)buttons.

4.Select Default Setting using the / button, press the OK or  button.

5.Select Yes and press the OK button to restore all setting to the factory default. Select No and press the OK or BACK button to return to the previous menu.

6.Con￿rm again to start loading default setting. Enter the password using the NUMERIC(0-9)buttons to perform restoring.

7.When completing the default setting, the installation wizard will run automatically. For detailed information about the installation wizard, refer to the Chapter 3. Installation Wizard.

Note: The default password is 0000. If you have forgotten your password, please contact your local product distributor.

GB49

User’s Manual