Humax CX-FOX C II manual Automatic Update

9. Software Update

2. Automatic Update

You can set the product to ￿nd the software update site and update software automatically.

1.Press the MENU button.

2.Select Installation using the / button and press the OK or  button.

3.Enter the password using the NUMERIC(0-9)buttons.

4.Select Software Update using the / button and press the OK or  button.

5.Select Automatic Update using the / button and press the OK or  button.

6.Automatically search for new software. Select Stop and press the OK button to ￿nish search.

7.When detecting update software, the following result is displayed. If new software is not found by Automatic Update, use Manual Update.

8.Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu without updating.

9.When completing the software update, the product is automatically powered o￿ and on again.

GB51

User’s Manual