3.3 Channel Search
Please wait until the channel search is complete.
1.During the channel search, the cursor is located at Stop.
Therefore, if you press the OK 
button during the search, the search will stop and the channels found until then will be displayed.
2.If the search does not find any channels, then press the OK 
or 
button to access the installation menu to search for the channels again. Please make sure that you have connected your aerial correctly.
3.You can delete unwanted channels from the found channels.
Select the channels to delete and press the OK 
button. Then select Delete and press the OK 
button. To delete all
channels, select Select All to select all channels, select Delete |
| |
and press the OK | button. | ** |
4.After completing the channel search and deleting unwanted
channels, select Save and press the OK 
button to save the changes.
3.4 Time Setting
You can set the GMT offset for the current time.
1.Select GMT Offset using the 
button and press the OK 
or 
button.
2.Select your GMT offset using the 
button and press the OK
button. GMT is changed by from 30 minutes to 1 hour.
3.Then select Next using the 
button and press the OK 
button.
**
Note: The current time is set automatically whenever GMT offset changes.
GB 21