10.4 Search
1.Select Search and press the OK 
button to activate channel search.
2.Wait until channels search is completed. This may take a few minutes.
3.The cursor is located at Stop during channel search. If you press
the OK 
button while performing channel search, the operation will stop and only the channels found so far will be displayed. Reset the settings and activate channel search again if necessary.
4.You can delete unnecessary channels from the searched
channels. Select the channels to delete and press the OK 
button. Then select Delete and press the OK 
button. To delete all channels, select Select All to select all channels, select Delete and press the OK button.
5.When completing channel search and deleting unnecessary channels, select Save and press the OK 
button to save the results.
GB 71