10. Installation
10.5 Default Setting
Default setting restores the product to the default settings.
Warning: Please note that once you perform default setting, all data such as channel list and user configured data are deleted, no information on the HDD will be lost.
1.Press the MENU 
button.
2.Select Installation using the 
button and press the OK 
or 
button.
3.Enter the password using the
4.Select Default Setting using the 
button and press the OK
or 
button.
5.Select Yes and press the OK 
button to restore all setting to factory default.
Select No and press the OK 
or BACK 
button to return to the previous menu.
6.Confirm again to start loading default setting. Enter the password
using the | ** |
|
7.When completing the default setting, press the OK 
button to automatically run the installation wizard.
For detailed information about the installation wizard, refer to
Chapter 3. Installation Wizard.
Note: The default password is 0000. If you have forgotten the password, please contact your local product distributor.
GB 72