Humax CX PVR-9200C manual Fast Rewind to Previous Scene, Fast Forward to the Next Scene, Recording

5. PIP and Time Shifted Recording

3. Fast Rewind to Previous Scene

Press the FAST REWIND button on the remote control to watch the scene passed by. Each time you press the

FAST REWIND button, the rewind speed increases. ( x 2, x 4, x 16, x32, x 64)

If you press the PLAY button, the fast rewind operation stops and the programme is played at normal speed.

Note: You can fast rewind back to the start point. If you reach the start point while rewinding, the programme is automatically played at normal speed from that point.

4. Fast Forward to the Next Scene

Press the FAST FORWARD button on the remote control to fast forward the programme.

Each time you press the FAST FORWARD button, the speed increases. ( x 2, x 4, x 16, x32, x 64)

If you press the PLAY button, the fast forward operation stops and the programme is played at normal speed.

Note: You can use the fast forward operation only when there is a time gap between the current watching point and the broadcasting (live) point caused by some previous operations such as pause, slow motion or fast rewind. You can fast forward to the current broadcasting point. If the watching point reaches the broadcasting (live) point, the programme is automatically played at normal speed.

5. Recording

Press the RECORD button on the remote control to record the current programme immediately . While the time shift operation records the programme temporarily, this record operation records the programme permanently so you can playback the recorded programme at any time. For more information about recording, refer to Chapter 6.

Recording and Playback.

Adjusting the Recording End Time

Press the RECORD button while recording to adjust the recording end time. You can adjust the recording end

time by -/+10 minutes using the button, and then press the OK button to change the recording end time and hide the message screen.

GB 32