KTI Networks KC-1300 operation manual Update Firmware

Page 11

Management

Specifications

 

Management

interface

 

Telnet

 

Via direct RS-232 console connection

Telnet

 

Via TCP/IP Telnet software

 

SNMP agent

Via TCP/IP SNMP manager software

HTTP server

Via web browser software

 

Protocols

 

 

 

IPv4

 

IP version4

RFC791

TCP

 

Transmission Control Protocol

RFC793

UDP

 

User Datagram Protocol

RFC768

ICMP

 

Internet Control Message Protocol

RFC792

SNMP

 

SNMP agent v1

RFC1157

MIB-II

 

Standard MIB

RFC1213

TFTP

 

Trivial File Transfer Protocol

RFC1350

TELNET

 

Telnet protocol

RFC854

H T T P

 

HTTP server for web management

RFC1945

Management Objects

 

Password for access control

Set and monitor

System status : CPU, memory, flash, software

Monitor

System power 1&2 status

Monitor

System fan status

Monitor

IP address of the system

Set and monitor

Subnet mask of the system

Set and monitor

Default gateway IP address

Set and monitor

SNMP name information

Set and monitor

SNMP location information

Set and monitor

SNMP contact information

Set and monitor

SNMP community names (up to 4)

Set and monitor

SNMP community access right (up to 4)

Set and monitor

SNMP trap host IP address (up to 3)

Set and monitor

Slot status : MC installed or not

Monitor

MC status : media type, speed, duplex

Monitor

MC link status of two ports

Monitor

Remote MC link status (two KC-300DMs link only) Monitor

SNMP Traps

 

Cold Start

System is powered on and completes initialization

Authentication failure

SNMP community authentication failure

Power status

The system power 1&2 failure and recovery

Fan failure

System fan failure and recovery

Slot # Port A link

Slot # MC Port A link down or up

Slot # Port B link

Slot # MC Port B link down or up

Slot # RTP link

Slot # Remote MC TP port link change

Update Firmware

Via TFTP protocol

Remote boot system

 

 

 

 

-11-

Image 11
Contents KC-1300 Modular Media Converter Center SystemInternational United StatesTrademarks Console and Telnet Operation Table of Contents IntroductionInstallation Network ManagementPage Introduction Features System Model Technical SpecificationsAC Power Chassis Module Specifications System interface Update Firmware System Units UnpackingPage Management Module UTP Port LED Indicators Color States InterpretationConsole Port AC Power Chassis Specifications KC1300-AC Power Chassis ModulesDC Power Chassis Specifications KC1300-DC Removal of System Power Chassis Insertion of System Power Chassis Media Converter Slots Page Rack Mounting Management Interface RS-232 / Protocol Management FunctionsProtocols Name Reference Protocols SupportedSetup for Out-of-band Console Management Factory default settings of the Console port Setup for In-band Management Management Objects Modify Monitor Functions supportedCold Start Power-on Self-testTelnet Management Login PromptDirect Console Management When login successfully, a Setup menu is shown as follows View IP Status IP MenuSet IP Address Community Snmp MenuLocation ContactView System Status View Converter Slots Status Slot status definitions are Restore Default Values Display current user name Change user name and passwordSecurity Manager Following information are required for Tftp operations Update FirmwareConfirm to start downloading Reboot SystemConfirm to update system flash memory Specify Tftp server IP addressSnmp Management Configuring Snmp Settings via Console Operation Private MIB Objects Get Remark Snmp Private MIBTrapName VarBind Snmp TrapsTrapName Event ofTrapGenerated Set IP Address for the System Unit Start Browser Software and Making ConnectionWeb Browser Login Login to the System UnitPage Converter Status Information includes System Status Administrator Menu Basic Page Snmp Entries System options Snmp Entries Community Strings Access rightSnmp Entries Trap Managers Console Port Information Security Manager Image Refresh Time Update Firmware Reboot System Slot Icon Operations