4.2 SNMP Menu
Select [2] from Setup menu to perform SNMP related settings. The fol- lowing figure illustrates the SNMP menu:
Snmp Menu
[0]Print this menu
[1]View Snmp Setting
[2]Set Snmp Name
[3]Set Snmp Location
[4]Set Snmp Contact
[5]Set Snmp Community
[6]Set Snmp Trap Manager
[7]Exit
Please Select
INET>
SNMP related settings are:
Name | : Logic name for the system (127 characters) |
Location | : Location where the system is installed (127 characters) |
Contact | : Contact person regarding the system (127 characters) |
Community | : SNMP communities to which the system belongs and |
| access right to the system ( R : read only, W : read/write) |
| Maximum of four communitiesare supported. |
Trap manager: IP address of the trap host to which a trap is issued and the trap community to which the system belongs. Maximum of three trap hosts are supported.
[Esc] key can be used to abort unfinished setting.