FUNAI MWR10D6 Before you start Connections Getting started, Recording Playing discs Editing

Page 3

Owner’s Manual

Recordable disc

•We strongly recommend for good recording quality:

TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x, MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x

•Discs that have been tested and are proven to be compatible with this recorder:

VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x, VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4x

DVD Recorder

MWR10D6

Before you start Connections Getting started

INSTRUCCIONES EN ESPAÑOL INCLUIDAS

Please read before using this equipment.

If you need additional operating assistance after reading this owner’s manual or

to order replacement accessories, please call

TOLL FREE : 1 800-605-8453

or visit our web site at http://www.funai-corp.com

Connection to a TV (Before you use this unit, you need to complete connections.)

If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below.

1)The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to the ANTENNA IN jack of this unit.

2)Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.

3)Connect your RF modulator to your TV by another RF cable.

4)Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables.

5)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.

6)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the instructions supplied with the RF modulator.

Recording Playing discs Editing

Cable Antenna TV signal

1

(Back of This Unit)

 

4

 

VIDEO IN

COMPONENT

 

 

 

 

IN

VIDEO OUTPUT

 

 

VIDEO OUT

 

 

S-VIDEO

Y

 

 

OUT

IN

OUT

 

 

 

 

Audio/Video cables

 

L

 

 

 

L

 

(supplied)

 

R

 

PB/CB

 

R

 

 

AUDIO IN

 

PR/CR

AUDIO OUT

 

 

 

(E1)

 

 

 

 

 

 

2

 

5

 

 

 

 

 

RF cable

Set channel 3 or 4.

 

 

(supplied)

 

 

AC 120V ANT IN CHANNEL

TO TV

AUDIO IN VIDEO IN

 

 

3

 

4

 

R

L

STEREO AUDIO/VIDEO

 

 

 

Antenna in jack

 

 

 

 

RF Modulator

 

 

 

 

3

RF cable

(commercially available)

 

 

 

 

(commercially available)

6

Turn on your TV and select channel 3 or 4.

(Back of TV)

Note

•The quality of picture may become poor if this unit is connected to an RF modulator.

Changing the Setup menu Others

Español

To record a program easily, refer to “Easy DVD recording” on pages 16-17 after connections are completed. (You CANNOT record on any copyright protected DVD disc with this unit.)

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Is a trademark of DVD Format/Logo Licensing Corporation Input Mode Names for Common TV BrandsPress STANDBY-ON to turn the unit on Box orAfter all recordings, finalize your disc Turn off the unit to set the Timer Standby modeTimer Recording is now set Disc Size Recording Video/Sound Mode Time QualityChanging the Setup menu Others Before you start Connections Getting startedRecording Playing discs Editing Make your contribution to the environment PrecautionsLaser Safety Before you startBefore you Precautions cont’dMoisture Condensation Warning Installation LocationSupplied Accessory Avoid the Hazards of Electrical Shock and FireOthers Español MaintenanceWith an AM radio Dolby Digital RecordingTable of contents Connections Getting started Recording Playing discs Editing FeaturesSymbol Description Changing the Setup menu Others EspañolFront Panel Indicator Guide Functional overviewFront Panel Changing the Editing Setup menu Others Español Functional overview cont’dRear Panel Remote Control Guide to Displays on screen menu Installing batteries in the remote controlUsing a remote control Display menuSetup menus Connections Connection to a TVThis unit 14 EN Connection to a cable box or satellite boxConnection to an Audio System Input jacksInput jack This operation may take a while to be recognized Getting startedEasy DVD recording This unit can record on the following type of discsChannel Disc Easy DVD recording cont’dInitial setting Channel settingGetting channels automatically Adding/deleting channels Channel setting cont’dSelecting the TV stereo or SAP Press Setup Using K / L, select Required Settings. Press OKRequired Settings menu will appear Using K / L, select TV Audio Select. Press OKPress Setup to exit Press STANDBY-ON to turn off the unit Setting the clockAuto Clock Setting Press Setup Using K / L, select Clock. Press OKManual Clock Setting Setting the clock cont’dConnections Selecting the TV aspect ratioBefore You startInformation Recording modeRecording Information on DVD recordingDVD+RW ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ Information on DVD recording cont’dSetting for Auto Chapter Before recordingReplacing disc menu Playing discs Changing the Setup menuBasic recording Press OPEN/CLOSE aMake sure that the TV input is set on the unit One-touch Timer RecordingRefer to Recording mode on Turn on the unit and load a recordable discTimer Recording Timer REC indicator will be off Timer Recording cont’dHints for Timer Recording Priority of overlapped settingsBefore you start Connections Getting started Recording Overwriting an existing title Overwriting from the beginning of the titleOverwriting in the middle of the title Overwriting an existing title cont’d Hints for OverwritingBefore you start Connection to an external source Settings for an external sourceUsing K / L, select E2 Front. Press OK Using K / L, select E1 Rear. Press OKRecording from an external source Settings for an external source cont’dSetting a disc to protect Changing Editing Setup menuFinalizing a disc Press Setup Using K / L, select Disc Edit. Press OKUsing K / L, select Finalize. Press OK Playing the discs in other DVD playersPlaying the discs in other DVD players cont’d Auto finalizingStart Connections Playing discs Information on DVD playGuide to displays Press Stop C to stop play- back Using K / L, select a desired title. Press OKBasic playback PlaybackStop mode, press Title to call up the MP3 menu Basic playback cont’dPlaying MP3 disc Press Play B to start play- backBeforeyou Playing discs using the disc menuPlaying discs using the title menu PauseFast forward / Fast reverse Skipping TV commercials during playX40 Slow forward / Slow reverse play Special playback cont’dRapid play Step by step playbackZoom Marker SetupTitle/Chapter search Using Prev H / Next GUsing Display SearchTime search Using / B, select Press OKSearch cont’d Track searchTrack Repeat/Random/Program playbackRepeat playback AllProgram playback Switching subtitlesRepeat/Random/Program playback cont’d Selecting the format of audio and videoStart Connections Getting started Recording Playing Switching audio soundtrackSwitching virtual surround system Selecting the format of audio and video cont’dSwitching camera angles Using K / L, select a desired option. Press OKReducing block noise Guide to a title list Editing discs Setup menuEditing Information on disc editingThis operation may take a while to be completed Using K / L, select Edit. Press OKEditing discs Deleting titlesAfter this operation is completed Press Return to exit Using K / L, select Edit Title Name. Press OKUsing K / L, select Yes Press OK Putting names on titlesSetting chapter marks Editing discs cont’dClearing chapter marks Before you start Connections Getting Using K / L, select Delete All. Press OKClearing chapter marks cont’d To delete all chapter marksUsing K / L, select Current Chapter. Press OK Hiding chapters56 EN Start Connections Getting Setting pictures for thumbnailsUsing K / L, select Index Picture.Press OK Setup menu Changing OthersDividing a title Putting name on disc Editing discs Setup menu60 EN Editing discs Setup menu cont’dSetting or releasing disc protect Using K / L, select Disc Protect OFF ON. Press OKReleasing disc from protect Setting or releasing disc protect cont’dUsing K / L, select Make Edits Compatible. Press OK Erasing discMaking edits compatible Tour of the Setup menu Changing the Setup menuLanguage setting Recording Playing Discs Language setting cont’dDisplay setting Changing the Editing Setup menu OthersAudio setting Display setting cont’dUsing K / L, select a setting Audio setting cont’dWhen playing disc with copyright protection Dynamic Range Control Default onProgressive Scan Default OFF Video settingDiscs Editing Settings for Parental lock levelYes Connections Getting started Recording PlayingPBC Video CD only Default on Settings for Parental lock level cont’dSettings for PBC Playback Control Change the passwordTroubleshooting Symptom RemedyOthers Recording/Timer Recording/Editing Symptom Remedy PlaybackOthers Troubleshooting cont’d74 EN Language codeGlossary Frequently Asked Questions76 EN SpecificationsPuede elegir entre distintos tipos de discos DVD grabables EspañolFácil grabación de DVD NotaFinalización de un disco Sugerencia 1 Reproduzca el contenido grabadoSugerencia 2 Edite el disco grabado ¿Qué son títulos y capítulos?Memo Customer Service TelVan Ness Avenue, Torrance, CA
Top Page Image Contents