FUNAI MWR10D6 owner manual Symptom Remedy Playback, Recording/Timer Recording/Editing

	Others
	Troubleshooting (cont’d)
Symptom	Remedy
Playback

The disc does not play.

•No disc is inserted.

•A blank disc is inserted.

•The disc is upside down. Insert the disc with the labeled side facing up.

•The disc is not correctly inserted.

•The unit cannot play certain discs (such as a CD-ROM) (page 38).

•The region code on the DVD-Video does not match the unit (page 38).

•Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about two hours until the moisture evaporates (page 4).

•If the disc was recorded on another recorder, the unit cannot play the disc if it was not finalized.

Playback image freezes for a second. • During the playback of two layered disc, picture may freeze for a moment when the 1st layer switches to the 2nd layer. This is not a malfunction.

The disc does not start playback from the beginning.

•Resume play was activated (page 42). Press [STOP C] twice.

•You have inserted a disc whose Title menu or DVD menu automatically appears on the TV screen when it is first insert.

The unit starts playing from the disc automatically.

• The DVD-Video features an auto playback function.

Some functions such as Stop, Search, or	• Depending on the disc, you may not be able to do some of the
Slow-motion Play cannot be performed.	operations above. See the instruction manual supplied with the disc.
The language for the sound track	• Multilingual tracks are not recorded being played.
cannot be changed.	• The DVD-Video prohibits the changing of the language for
	the sound track.
	• Try changing the language using the DVD-Video’s menu.

The subtitle language cannot be changed or turned off.

•Multilingual subtitle are not recorded on the DVD-Video.

•The DVD-Video prohibits changing of the subtitles.

•Try changing the subtitle using the DVD-Video’s menu.

The angles cannot be changed.

•Multi-angles are not recorded on the DVD-Video being played.

•The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up.

•The DVD-Video prohibits changing angles.

•Try changing the angle using the DVD-Video's menu.

Recording/Timer Recording/Editing
The channel cannot be changed from	• Set the TV’s input to “TV.”
the channel you are recording.
Recording does not start immediately	• A brand-new DVD+RW or DVD-RW has been inserted. It takes a
after you press [RECORD I] or [REC I].	while for the unit to automatically format a DVD+RW/-RW.
Nothing was recorded even though	• There was a power failure during recording.
you set the timer setting correctly.	• The unit’s internal clock stopped due to a power failure
	that lasted for more than 30 seconds.
	Reset the clock (pages 21- 23).
	• Disconnect the AC power cord from the AC outlet, and
	connect it again.
	• The program contains copy protection signals that restricts
	copying.
	• The timer setting overlapped with another setting that has
	priority.
Recording does not stop immediately	• It will take a few seconds for the unit to input disc data
after you press [STOP C].	before recording can stop.
Timer Recording is not complete or	• The timer setting overlapped with another setting that has
did not start from the beginning.	priority (page 31).
	• Disc space was not enough.

72EN