FUNAI TB100MW9 owner manual Connecting to TV and Video Devices VCR, DVD Recorder, etc

Page 12

OTHER CONNECTIONS

Connecting to TV and Video Devices (VCR, DVD Recorder, etc)

e.g.: Connection to DVD Recorder

Rear panel of STB

AUDIO OUT		VIDEO
R	L	OUT

ANT. IN

ANT. ΟUΤ

To audio input jacks (L, R)

To video input jack

Video cable

Audio cable

Audio cable

Video cable

DVD Recorder

Supplied cables used in this connection are as follows:

•RF cable x1

Please purchase the rest of the necessary cables at your local store.

Before connecting, ensure the AC power cords of all devices are NOT connected to the AC outlets.

1Refer to “Connecting an Antenna” on page 9 to connect the STB to an antenna.

2Use a standard audio/video cable to connect the AUDIO/VIDEO OUT jacks on the STB to the audio/video input jacks on the DVD recorder.

3Use a standard audio/video cable to connect the audio/video output jack on the DVD recorder to the audio/ video input jack on the TV.

4Plug all AC power cords into AC outlets, then turn all devices on.

5Set the TV and DVD recorder to input mode.

Refer to your TV’s or DVD recorder’s manual for details.

NOTE:

•If your DVD recorder is monaural (MONO) and has only one audio jack, use a standard audio cable (white) to connect the AUDIO OUT jack (white) on STB to the audio input jack (white) on the DVD. The red cable and jack will not be used.

12

EN

X6040UD_Book.indb 12

10/22/2007 5:09:13 PM

Image 12

Contents TB100MW9 Before Using Risk of Electric Shock Do not OpenBefore Using Precautions LocationTable of Contents Major Features of STB Information on Digital BroadcastingTrademark Information Before Using Location of ControlsAccessories Installing Batteries Snap the battery cover backConnecting an Antenna When Connecting to Cable Box optional AlsoConnections Basic ConnectionConnecting to TV Supplied cables used in this connection are as followsOther Connections STB Connection to a Standard Stereo SystemConnecting to TV and Video Devices VCR, DVD Recorder, etc DVD RecorderInitial Setup Initial Setup Setup Wizard Select Autoscan using K / L, then press OKTo cancel during scanning Selecting Channels on the STB Channel BannerChoosing Audio Language Picture StillAdvanced Operation Adding/Deleting ChannelsAdjusting Antenna Press Setup to exit Setup menuReceiving Channels Autoscan Select the channel number you want toSelecting Display Mode Select Display Mode using K / L, then press OKTo cancel during scanning Press Setup or OK When no Signal appears on the screenSetting the Time Zone and DST Daylight Saving Time Select Time Zone using K / L, then press OKSelect D.S.T using K / L, then press OK Select on or OFF using s / B, then press OKSelect Mpaa Rating using K / L, then press OK Enter the password using the number buttonsSee the following description for setting each item Chip OptionsSelect TV Rating using K / L, then press OK Password entry fieldFollow steps 1-3 in V-Chip Options On page 21, then enter 4737Enter the new 4-digit password using the number buttons Select DTV CC using K / L, then press OKSelect CC Style using K / L, then Closed Caption OptionsAuto Power Down Select desired amount of time using K / L, then press OKTroubleshooting Symptom RemedyOthers Specifications Glossary and AcronymsGuía Para Rápida Consulta Antes de utilizarConexiones Conexión básicaCuando conecte tambien a la caja de cable opcional Observación para el instalador del sistema de cable de TVGuía Para Rápida Consulta Ajuste inicialAsistente de ajustes Para cancelar durante la exploración Presione OK Seleccione RF Fuera siMemo Limited Warranty