FUNAI TB100MW9 owner manual Selecting Channels on the STB, Channel Banner

BASIC OPERATION

Selecting Channels on the STB

About Sub-channel Broadcasting

Digital broadcasting offers a service that enables multiple signals, called “sub-channels”, to be sent simultaneously on one main channel by using its high compression technology. Therefore, every digital channel number consists of a main channel and a sub-channel number.

NOTE:

•	If you do not have a particular sub-channel number
	you want to select, enter the main channel number
	and then press [OK]. (If the main channel number
	is 1digit, you should press [OK] twice.) The STB
	automatically tunes in to the lowest sub-channel for
	the selected main channel.
•	Press [ALT. CH] to return to the previously viewed
	channel.

18:00

: changes automatically 18:30

: changes manually by using [CH / ]. 19:00

19:30

20:00

ATSC

CH4-1

CH4-1 CH4-2 CH4-3

CH4-1

CH4-1 CH4-2

• “NO SIGNAL” appears after the sub-channel

broadcast is over. Change the channel to continue

watching.

Channel Banner

The channel banner provides you with information on the channel you have selected.

1 Press [DISPLAY] to display the channel

banner.

This section tells you how to select the desired digital channel on the STB.

NOTE:

•Before you begin, make sure you complete the autoscan in “SETUP WIZARD” or in “SETUP” menu.

When Using [CH / ]:

•Press [CH ] to tune a higher channel number.

•Press [CH ] to tune a lower channel number.

When Using the Number Buttons:

1.Enter the main channel number.

If the main channel number is 1 digit, press [.] when finish entering.

If the main channel number is 2 digits, proceed to step 2.

2.Enter the sub-channel number.

If the sub-channel number is 1 digit, press [OK] when finish entering. (You do not need to press [OK] if the sub-channel number is 2 digits.)

E.g., selecting 6.1

6 . 1 OK

Program					Station name
title	SMILE	ABC-XXX		3.1	Channel number :
	CC	ENGLISH 1/2
Information					Indicates the current
		SIGNAL	50		channel number.
icons

(See below for				Audio language
detail.)
			RESTRICTED PROGRAM
Program				Signal strength :
rating:		TV-Y7 FV		Indicates the signal
Displays all the				strength of the current
available ratings.				channel.	BASIC OPERATION
Active ratings are
highlighted in red.
		Information Icons
	LOCK:
	Indicates that the current program is blocked
	according to your v-chip setting.

CC (Closed Caption):

Indicates that the program being broadcast is available with closed captioning.

E.g., selecting 26.12

2 6 1 2

15

EN

X6040UD_Basic Operation_05.indd 15

2007/11/21 11:55:37