FUNAI TB100MW9 Connecting to TV, Supplied cables used in this connection are as follows

Page 10

CONNECTIONS

Connecting to TV

Rear panel of STB

AUDIO OUT		VIDEO
R	L	OUT

ANT. IN

ANT. ΟUΤ

To audio input jacks (L, R)

Video cable

Audio cable

AND/OR

To video input jack

To antenna input jack

Supplied cables used in this connection are as follows:

•RF cable x1

Please purchase the rest of the necessary cables at your local store.

RF cable

Before connecting, ensure the AC power cords of all devices are NOT connected to the AC outlets.

1Refer to “Connecting an Antenna” on page 9 to connect the STB to an antenna.

2Use an RF cable to connect the ANT. OUT jack on the STB to the antenna input jack on the TV.

AND/OR

Use a standard audio/video cable to connect the AUDIO/VIDEO OUT jacks on the STB to the audio/video input jacks on the TV.

3Plug all AC power cords into AC outlets, then turn all devices on.

4After you have completed the connections, select an appropriate external input channel on your TV (ch3 or ch4) (refer to your TV’s manual for details), and also set the STB’s output channel to the corresponding channel number (3 or 4). You can switch between 3 and 4 by holding [SETUP] down over 3 seconds.

NOTE:

•When using either of these connections, the resolution of the video signal output will always be 480i. This ensures that all digital TV programming, no matter what the actual transmitted format is, will be viewable and compatible with your analog TV.

•If your TV is monaural (MONO) and has only one audio jack, connect a standard audio cable (white) from the AUDIO OUT (white) jack on the STB to an audio input jack (white) on the TV. The red cable and jack will not be used.

10

EN

X6040UD_Connections_02_03.indd 10

2007/11/20 22:25:33

Image 10

Contents TB100MW9 Before Using Risk of Electric Shock Do not OpenBefore Using Precautions LocationTable of Contents Information on Digital Broadcasting Major Features of STBTrademark Information Before Using Location of ControlsAccessories Installing Batteries Snap the battery cover backConnections Connecting an AntennaWhen Connecting to Cable Box optional Also Basic ConnectionConnecting to TV Supplied cables used in this connection are as followsOther Connections STB Connection to a Standard Stereo SystemConnecting to TV and Video Devices VCR, DVD Recorder, etc DVD RecorderInitial Setup Select Autoscan using K / L, then press OK Initial Setup Setup WizardTo cancel during scanning Selecting Channels on the STB Channel BannerChoosing Audio Language Picture StillAdvanced Operation Adding/Deleting ChannelsReceiving Channels Autoscan Adjusting AntennaPress Setup to exit Setup menu Select the channel number you want toTo cancel during scanning Press Setup or OK Selecting Display ModeSelect Display Mode using K / L, then press OK When no Signal appears on the screenSelect D.S.T using K / L, then press OK Setting the Time Zone and DST Daylight Saving TimeSelect Time Zone using K / L, then press OK Select on or OFF using s / B, then press OKSee the following description for setting each item Select Mpaa Rating using K / L, then press OKEnter the password using the number buttons Chip OptionsFollow steps 1-3 in V-Chip Options Select TV Rating using K / L, then press OKPassword entry field On page 21, then enter 4737Select CC Style using K / L, then Enter the new 4-digit password using the number buttonsSelect DTV CC using K / L, then press OK Closed Caption OptionsAuto Power Down Select desired amount of time using K / L, then press OKSymptom Remedy TroubleshootingOthers Specifications Glossary and AcronymsGuía Para Rápida Consulta Antes de utilizarCuando conecte tambien a la caja de cable opcional ConexionesConexión básica Observación para el instalador del sistema de cable de TVAjuste inicial Guía Para Rápida ConsultaAsistente de ajustes Para cancelar durante la exploración Presione OK Seleccione RF Fuera siMemo Limited Warranty