Panasonic AK-HRP931P manual Adjustment item up and down shift switches 3, Hsaw Hpar Vsaw Vpar

Page 7

Parts and their functions

15600K switch [5600K MODE]

This is used to change the amplification rate of the GBR signals by an electrical circuit to achieve a white balance that corresponds to the color temperature of 5600K. When it is pressed, the B video signal is attenuated by approximately -6 dB, the R video signal is boosted by approximately 3 dB, and the G video signal is not attenuated. Select this switch setting for shooting under a 5600K light source or shooting outdoors.

When the lamp of the switch is off, the white balance is made to correspond to a color temperature of 3200K.

2Flare OFF switch [FLARE OFF MODE]

This is used to cancel the flare correction function (which suppresses the rise of the pedestal in proportion to the light quantity). Its lamp lights when the function is canceled.

3Black gamma ON switch [BL-K GAMMA ON MODE] This is used to enable the black gamma function (which changes the video signal amplification rate in parts where the light quantity is low). Its lamp lights when the function is enabled.

4Gamma OFF switch [GAMMA OFF MODE]

This is used to cancel the gamma correction function (which provides the signal level of the video signals with the reverse characteristics matching the TV video signal input and light-emitting level characteristics). Its lamp lights when the function is canceled.

5This switch is not supported at the present time.

6Knee OFF switch [KNEE OFF MODE]

This is used to cancel the knee function that attenuates those parts of the video signals where a particular level (knee point) has been exceeded so that they will not become saturated as easily. Its lamp lights when the function is canceled.

7White clip OFF switch [WHITE CLIP OFF MODE]

This is used to cancel the white clip function by which the video signal output is clipped (saturated). Its lamp lights when the function is canceled.

8Matrix ON switch [MATRIX ON MODE]

This is used to enable the matrix function by which the chroma saturation is compensated for the G (green), B (blue), R (red), Ye (yellow), Cy (cyan) and Mg (magenta) signals and by which the chroma saturation and hue are compensated for the I (skin tone) signals. Its lamp lights when the function is enabled.

9HDTV detail OFF switch [HD.DTL OFF MODE]

This is used to cancel the detail enhancer function that enhances (adjusts the relative hardness/softness) of the picture quality in the detailed parts of the HDTV video output. Its lamp lights when the function is canceled.

:SDTV detail OFF switch [SD.DTL OFF MODE]

This is used to cancel the detail enhancer function that enhances (adjusts the relative hardness/softness) of the picture quality in the detailed parts of the SDTV video output. Its lamp lights when the function is canceled.

CONTROL

 

 

 

SHADING

 

 

 

WHITE

BLK

 

 

BLACK

WHITE

R

G

B

KNEE

CLIP

GAMMA

UNDO

>

 

 

 

 

 

 

 

 

?

PED

FLAME

GAMMA

GAIN

HD. DTL

SD. DTL

MATRIX

SYSTEM

FUNC

@

A

>Adjustment item up and down shift switches [3, 4]

These are used to scroll the control item display indicated by one of the control item selector switches ? up or down.

?Control item selector switches

When these switches are selected (when their lamps are lighted), the corresponding adjustment items and adjustment values appear on the LCD display. The adjustment values can be changed by one of the 16 adjustment rotary encoders.

1

2

 

3

 

4

5

6

7

 

 

SHADING

 

 

 

WHITE

BLK

 

BLACK

WHITE

R

G

B

KNEE

CLIP

GAMMA

UNDO

PED

FLAME

GAMMA

GAIN

HD. DTL

SD. DTL

MATRIX

SYSTEM

FUNC

8 9 : ; < = > ? @

1Black shading control switch

[BLACK SHADING CONTROL]

This is used to correct the black shading (the coloring of black images.) When it is pressed and its lamp is lighted and when one of the SHADING R, B or B switches is then pressed and selected, the adjustment items for the black shading appear on the LCD display. The black shading correction can be adjusted using four of the 16 adjustment rotary encoders.

HSAW HPAR VSAW VPAR

–100 –49 0 +7

HSAW: Horizontal sawtooth wave correction

This is used to correct the coloring of black screen images in the horizontal direction in the range of -100 to 100. When the numerical setting is incremented, the video level at the left of the screen is increased.

HPAR: Horizontal parabola correction

This is used to correct the coloring of black screen images in the horizontal direction in the range of -100 to 100. When the numerical setting is incremented, the video level at the left and right of the screen is increased.

VSAW: Vertical sawtooth wave correction

This is used to correct the coloring of black screen images in the vertical direction in the range of -100 to 100. When the numerical setting is incremented, the video level at the

top of the screen is increased.

7

Image 7
Contents AK-HRP931P FCC Note Safety precautionsAccessories ContentsOverview Operating precautions Parts and their functions = Mode ON/OFF switches PM character display switch CharacterCPU reset switch RST Vertical frequency status indicator 60Hz100 -49 0 +7 Adjustment item up and down shift switches 3? Control item selector switches Hsaw Hpar Vsaw VparBlkr Blkm Blkb Rpnt Mpnt BpntRslp Mslp Bslp ClipVdtl Hdtl Crsp Peak LDP Dark Rflr Gflr BflrRgam Ggam Bgam Rgan Ggan BganLDP Dark 10% Vdtl Hdtl Crsp PEAK1 PEAK2HCO Hfin Sdtv Gain PhaseHead OPT Level CCU OPT LevelALC Sped @ LCD display Adjustment rotary encodersMonitor selector switches Master pedestal active switch M-PED Active Iris joystick control range selector switch FullAuto iris switch Auto Iris active switch Iris ActiveConnections CCU connectorRCP connector Preview control connector PreviewSpecifications External dimension drawingsVQT0A41