@ LCD display, Adjustment rotary encoders

Parts and their functions

POWER (FAN): Fan power switch

This is used to set the power of the camera head’s fan to ON, OFF, or AUTO.

SPEED (FAN): Fan speed

This is used to set the speed of the camera head’s fan.

2D-M: Component 2-dimensional low-pass filter

This is used to set whether to apply the 2-dimensional low- pass filter to the SDTV component output.

2D-E: Composite 2-dimensional low-pass filter

This is used to set whether to apply the 2-dimensional low- pass filter to the SDTV composite output.

COMB: Comb filter mode

This is used to set the comb filter mode.

AUTO SETUP MODE: Auto setup mode setting

This is used to select the auto setup mode setting.

MPED: Auto setup MPED convergence value

This is used to set the position where the master pedestal is to be converged when auto setup has been started.

FSEL: File select

This is used to select the file attribute to be referenced when auto setup has been started.

BRIGHT: Dot matrix display brightness setting

This is used to set the brightness of the dot matrix display.

CONT: LCD display contrast setting

This is used to set the LCD display contrast.

BUZZ: ROP buzzer setting

This is used to set the panel’s buzzer to ON or OFF.

CAMNO: Camera number setting

This is used to set the number of the camera to which this unit is connected.

DTL (PAINT): DTL control mode

This is used to set the paint control DTL to SD or HD.

BLACK (PAINT): BLACK control mode

This is used to set the paint control BLACK to be used with the flare, pedestal or gamma.

<CARD>: SD card read/write setting

This is used to write the camera’s data on the SD card or read it from the card.

@LCD display

This shows the adjustment items and adjustment values when the control item selector switches ? have been selected.

AAdjustment rotary encoders

These enable the data of the adjustment items shown on the LCD display @ to be changed.

FILTER

		ND			HEAD			CC		B
CAP	100	25	6.3	1.6		3.2	4.3	6.3	DFO	B
		SCENE FILE			STORE			MONITOR
	1	2	3	4	STORE	R	G	B SEQ	ENC
C	1	2	3	4		R	G	B SEQ	ENC	D
C										D
	5	6	7	8
G			GAIN					GAIN
	R		GAIN		B		-6 -3 0 3 6 9 12
	R		G		B		-6 -3 0 3 6 9 12
										E
H			BLACK				SHUTTER
	R		BLACK		B
	R		G		B
							ON	VAR		F
										F
			DTL
								FULL	AUTO

LJ K

B		ND			FILTER		CC
		ND			HEAD		CC
CAP	100	25	6.3	1.6	3.2	4.3	6.3	DFO

1 2 3

1ND filter switches [ND FILTER 1, 2, 3, 4, 5]

These are the ND filter selector switches. The filter setting can be changed when the HEAD switch lamp is off.

ND1: Cap

ND2: Through (green light emitted)

ND3: 1/4

ND4: 1/16

ND5: 1/32

2HEAD switch [HEAD FILTER]

This is used to switch the control over the filter to the camera head. Its lamp lights when filter control by the camera head is enabled, and it goes off when filter control by this panel or MSU is enabled.

The lamps of the HEAD switches on this panel and MSU will light also when the LOCAL switch on the operation panel at the back of the studio camera has been pressed and its lamp is lighted.

3CC filter switches [CC FILTER A, B, C, D, E]

These are the CC filter selector switches. The filter setting can be changed when the HEAD switch lamp is off.

CCA: 3200K (green light emitted)

CCB: 4300K

CCC:6300K CCD: Cross CCE: DF0

C	SCENE FILE			STORE
1	2	3	4	STORE
1	2	3	4
5	6	7	8
3	1			2

1Scene file switches [SCENE FILE 1 to 8]

These enable the camera settings for each scene or the data in the adjustment data that can be transferred to another camera to be saved in or called from eight files that serve as scene files.