Installing the TV
To set up your TV to use both a Cable Box and a
1Connect the Cable TV cable to the TV’s VHF/UHF jack.
2Using a coaxial cable, connect the TV’s TO CONVERTER jack to the cable box’s IN jack. The TV’s internal converter allows you to switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.
3Using a coaxial cable, connect the cable box’s OUT jack to the TV’s AUX jack.
Cable box
IN
OUT
AUX
Rear of TV
TO CONVERTER
Signal
VHF/UHF
CATV cable (unscrambled channels)
To switch between channels from Cable Box and channels coming directly into TV
❑Press the ANT button on the TV remote control.
To use the TV remote control to switch channels on the cable box
❑Program the remote control as necessary. (See “Programming the Remote Control” on page 50.)
To use the cable box
❑Have your TV tuner set to channel 3 or 4 (as appropriate) and then use the Cable Box to change channels.
To prevent the accidental switching of TV channels
❑When using the VCR or Cable Box, you can use the Channel Fix feature to lock in a channel. The Channel Fix feature is under the Channel menu. (See “Using the Channel Menu” on page 40.)
12