Sony KV 32HS20 operating instructions Connecting a DVD Player with Component Video Connectors

Page 31

Installing the TV

Connecting a DVD Player with Component

Video Connectors

This is the preferred hookup to use if your DVD player has component (Y, PB, PR) jacks.

1Using three separate component video cables, connect the DVD player’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV — the number 5 or 6 connections under HD/DVD IN.

✍The Y, PB and PR jacks on your DVD player are sometimes labeled Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to like colors.

2Using an audio cable, connect the DVD player’s Audio OUT jacks to the TV’s Audio IN jacks. Be sure to use the same column of inputs that you used for the video connection (HD/DVD IN 5 or 6).

Component video cables

DVD player

TV

AUDIO-R (red)

AUDIO-L (white)

Audio cable

✍You cannot use the MONITOR OUT jacks to record the signal from any equipment connected into the Y, PB, PR jacks.

23

Image 31

Contents Operating Instructions Page Installing SafetyOwner’s Record Important Safeguards Safety Check Power-Cord ProtectionService Damage Requiring Service Replacement PartsPage Contents Page Topic OverviewPresenting the FD Trinitron Wega FeaturesUsing the Remote Control Package ContentsButton Description Button DescriptionsWhite GuideWf VCR/DVD Controls Wa SleepWs DVD Menu Wd Code SETInstalling the TV AUX TV Controls and ConnectorsFront Panel Menu Controls TV Rear Panel Connection DescriptionVideo VHF/UHFControl S IN/OUTVHF Only or UHF Only or VHF/UHF Basic Connection Connecting Cable TV or AntennaConnecting Directly to Cable or to an Antenna VHF Only or VHF/UHF or CableCable Box and Cable Cable and Antenna Cable Box ConnectionsTo use the cable box To prevent the accidental switching of TV channelsCable Box Only To prevent accidental switching of TV channelsConnecting a VCR and Cable Connecting a VCR and Cable Box To view the cable box signals To use Twin View with the cable box To view what is being recorded Connecting Two VCRs for Tape EditingTo change the video input of the VCR Connecting a Satellite Receiver Connecting a Satellite Receiver with a VCR To watch cable TV To watch satellite TV, or the VCRTo connect to an audio receiver Connecting an Audio ReceiverConnecting a DVD Player with Component Video Connectors To switch between your TV and DVD Connecting a DVD Player with A/V ConnectorsConnecting a Digital TV Receiver To view the camera’s output Connecting a CamcorderUsing the Control S Feature Reset TV to Factory Settings Setting Up the TV AutomaticallyUsing the Features To display a list of your favorite channels Using Favorite ChannelsDisplaying Twin Pictures Using Twin ViewTo display twin pictures Factors affecting Twin View include Activating the PictureTo activate the right picture To activate the left pictureChanging the Picture Size To use the Freeze function Using the Freeze FunctionOpening and choosing a menu To end a menu sessionMenu Icon Description Option Description Using the Video MenuSelecting Video Options To select the Video MenuWarm DRC modeCool NeutralOFF Using the Audio MenuSelecting Audio Options To select the Audio MenuMTS To select the Channel Menu Using the Channel MenuOption Description Favorite Channel OptionDescription To select the Parent Menu Using the Parent MenuUsing the Parent Menu TV-PG US Models Selecting Custom Rating OptionsTV-Y TV-G18+ English RatingC8+ 14+Selecting Timer Options Using the Timer MenuSelecting Using the Setup MenuSetup Options To select the Setup MenuAuto Other Information With the remote control Programming the Remote ControlTips Cable Boxes Manufacturer’s Codes VCRsManufacturer Code DVD PlayersTo Do This Press Operating Other Equipment with Your TV Remote ControlOperating a VCR Operating a DVD PlayerDisplay Operating a Cable BoxOperating a Satellite Receiver Operating an MDP Laserdisc PlayerProblem Possible Remedies TroubleshootingProblem Possible Remedies All Models General SpecificationsKV-36HS20 KV-32HS20Index Favorite Channel VCR Page