Sony KV 32HS20 operating instructions Problem Possible Remedies

Other Information

Problem	Possible Remedies
Cannot gain enough volume ❏		Increase the volume of the cable box using the cable box’s remote control.
when using a cable box		Then press TV (FUNCTION) and adjust the TV’s volume.
Cannot receive channels	❏	Use Auto Program in the Channel menu to add receivable TV channels that
		are not presently in TV memory (see page 40).
Unable to select a channel	❏	Use Auto Program in the Channel menu to add receivable TV channels that
		are not presently in TV memory (see page 40).
Lost password	❏	In the password screen (see page 42), enter the following master password:
		4357. The master password clears your previous password; it cannot be
		used to temporarily unblock channels.
Cannot change channels	❏	Be sure you have not inadvertently switched your TV from channel 3 or 4
with the remote control		setting if you are using another device to change channels.
	❏	If you are using another device to control channels, be sure the “function”
		button for that device has been pressed.
Cannot cycle through the	❏	Be sure the Video Label feature has not been set to Skip (see page 48).
other video equipment
connected to the TV

There is a black box on the screen

❏You have selected a text option in the Setup menu and no text is available. (See page 47 to reset Setup selections.) To turn this feature off, select OFF in the Caption Vision option. If you were trying to get closed captioning, select CC1 instead of Text 1-4.

There is no twin picture or it is just static

❏Be sure your twin picture is set to a video source/channel that has a program airing.

❏You may be tuned to a video input with nothing connected to it. Try cycling through your video inputs using the TV/VIDEO button.

❏Twin View is not set to receive a signal from the AUX input. If you have connected a VCR or satellite receiver to the AUX input on the TV, it will not show in the right picture.

I get the same program	❏ Both may be set to the same channel. Try changing channels in either the
in both Twin View pictures	left or right picture.
	❏ You may be running all your channels through a cable box. The cable box
	will only unscramble one signal at a time. If possible, run a direct cable to
	your TV’s VHF/UHF input. (This will only work if your cable system
	provides an unscrambled signal.)

I cannot get anything but TV channels in my left or right Twin View picture

❏Be sure the video label has not been set to skip your video inputs. See the Setup menu on pages 47 and 48.

If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669) (Canadian residents only).

56