Installing the TV
Setting Up the TV Automatically
After you finish connecting your TV, you can run Auto Setup to set up your channels. The Auto Setup screen appears when you turn your TV on for the first time after installing it. If you do not want to set up the channels at this time, you can do it later by using the Auto Program feature in the Channel menu (see page 40 for information regarding Channel menu).
✍The Auto Setup feature does not apply for installations that use a cable box for all channel selection.
Using Auto Setup | 1 |
| 2 |
| 3 |
| 4 |
Turn on the TV.
Press the TV FUNCTION button on the remote control. Press CH+ to run Auto Setup.
After Auto Setup has run, press CH– to exit.
Reset TV to Factory Settings
To reset your TV to the factory settings
1Turn on the TV.
2Hold down the RESET button on the remote control.
3Press and release the POWER button on the TV. (The TV will turn itself off, then back on.)
4Release the RESET button.
28