Specifications 29LS35
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
TV system:
B/G/H, D/K
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
VHF: | |
UHF: | |
CATV: | |
HYPER: | |
D/K: |
Picture Tube:
Flat Display FD Trinitron
29” (approx. 73 cm. measured diagonally)
Sound Output:
2 x 14 W (music power)
2 x 7 W (RMS)
Woofer:
20 W (music power)
10 W (RMS)
Power Consumption:
94 W
Standby Power Consumption:
0.5 W
Dimensions (w x h x d) : Approx. 771 x 592 x 553 mm.
Weight:
Approx. 49 Kg.
Problem
No picture (screen is dark) and no sound.
Poor or no picture (screen is dark), but good sound.
No picture or no menu information from equipment connected to the Scart connector.
Good picture, no sound.
Solution
•Check the aerial connection.
•Plug the TV in and press the 
button on the front of TV.
•If the standby indicator 
is on, press 
button on the remote control.
•Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to the factory settings.
•Check that the optional equipment is on and press the
button repeatedly on the remote control until the correct input symbol is displayed on the screen.
•Press the 
+/- button on the remote control.
•Check that “TV Speakers” is “On” on the “Sound Adjustment” menu.
11
Rear Terminals
:1/ | |
| (CENELEC standard) |
| including audio/video |
| input, RGB input, TV |
| audio/video output. |
:2/q
including audio / video input, S video input, selectable audio / video output and Smartlink interface.
audio outputs (Left/ Right) - phono jacks
Front Terminals
q3 S Video input - 4 pin DIN …3 video input – phono jack 
3 audio input – phono jacks
headphones jack
Accessories supplied:
1 Remote Control
2 Batteries (IEC designated)
Other features:
•Teletext, Fastext, TOPtext
•Sleep Timer
•Smartlink (direct link between your TV set and a compatible VCR. For more information on Smartlink, please refer to the Instruction Manual of your VCR).
•TV system Autodetection.
•Dolby Virtual.
GB
No colour on colour programmes. | • Using the menu system, select the “Picture |
| Adjustment” menu and select “Reset” to return to |
| factory settings. |
Distorted picture when changing | • Turn off any equipment connected to the Scart |
programmes or selecting teletext. | connector on the rear of the TV. |
Wrong characters appear when | • Using the menu system, enter to the “Language/ |
viewing teletext. | Country” menu and select the country in which you |
| operate the TV set. For Cyrillic languages, we |
| agreement to select Russia country in the case that your |
| own country does not appear in the list. |
Picture slanted | • Using the menu system, select the “Picture Rotation” |
| option in the “Detail Set Up” menu to correct the |
| picture slant. |
Noisy picture when viewing a TV | • Using the menu system, select the “Manual |
channel. | Programme Preset” menu and adjust Fine Tuning |
| (AFT) to obtain better picture reception. |
| • Using the menu system, select the “Noise Reduction” |
| option in the “Detail Set Up” menu and select |
| “On” to reduce the noise in the picture. |
GB
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
No unscrambling or unstable picture whilst viewing a scrambling channel with a decoder connected through the Scart connector :2/q.
Remote control does not function.
The standby indicator 
on the TV flashes even though the “On Timer” function is not in use.
•Using the menu system, select the “Set Up” menu. Then enter to “Detail Set Up” option and set “AV2 Output” to “TV”.
•Replace the batteries.
•Contact to your nearest Sony service centre.
In case of problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Additional Information
21