SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal
=> | => |
=> | <= |
=> | <= |
=>
Release the mains power cable from its securing posts. Remove the rear cover fixing screws indicated. Pull the rear cover away from the front beznet. Take care when removing the rear cover not to damage the speaker cables as speakers are fitted inside the rear cover.
2-3. Chassis Removal and Refitting
To remove lift the main bracket rear slightly and slide the chassis away from the beznet. Ensure that the interconnecting leads are released from their purse locks to prevent damage being caused.
2-2. Speaker Connector Disconnection
Before completely removing the rear cover disconnect the speaker connectors which are located on the inside base of the beznet.
When refitting the chassis ensure that the main bracket is located in the beznet guide slots before sliding the chassis forwards. Refit the interconnecting leads in their respective purse locks.
12