Troubleshooting

 

 

 

 

 

 

 

 

Transfer button/light

 

 

 

 

 

Light status

Cause

 

Action/solution

Light blinks green

Pictures transferred to the

 

None required.

 

computer.

 

After transferring pictures, the transfer

 

 

 

 

light continues to blink green until

 

 

 

 

either the camera is removed, the

 

 

 

 

Transfer button is pressed again, or the

 

 

 

 

connection is no longer available.

 

 

 

 

 

 

Light is off

No pictures in camera or on

 

None required.

 

memory card.

 

To enable Transfer:

 

Camera not docked.

 

1 Connect printer dock to computer

 

 

 

 

 

(page 22).

 

Printer dock not connected to

2

 

Take pictures.

 

computer.

 

 

 

3

Dock the camera.

 

 

 

 

 

 

 

Camera not properly seated on

 

Reseat the camera on the printer dock

 

connector.

 

(page 7).

 

 

 

 

 

 

 

 

Computer off.

 

Turn on the computer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Red-eye-reduction button/light

 

 

 

 

 

Light status

 

Cause

 

 

 

 

Action/solution

Light glows green

 

Red-eye reduction applied to

 

 

None required.

 

 

pictures for current print job.

 

 

To turn red-eye reduction on

Light is off

 

Red-eye reduction not selected.

 

or off, press the

 

 

 

 

 

 

 

Red-Eye-Reduction button.

 

 

 

 

 

 

 

 

www.kodak.com/go/support

53

Page 59
Image 59
Kodak G600 Memory card To enable Transfer Camera not docked, Connector Computer off Turn on the computer, Or off, press