Setting up your digital camera
Refreshing the Kodak Ni-MH rechargeable camera battery
IMPORTANT: The battery refresh feature is intended for use with the Kodak
Battery status light
Battery light glows green when charging is complete.
8 hours for full refresh
NOTE: If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The refresh cycle completely discharges the battery, then fully charges it. See Extending battery life, page 60.
1Make sure the
2Place your EasyShare camera on the printer dock (page 7).
3Press and hold the Print Layout button, , and the
, on the printer dock at the same time until the Battery status light blinks amber (approximately 5 seconds), then release the buttons.
To purchase a Kodak
www.kodak.com/go/support | 9 |