Kodak G600 manual Print is too, Light or under, Exposed, Necessary, Details, Discolored

Troubleshooting

If... Try the following

Print is too	IMPORTANT: Use only Kodak color cartridge & paper kits (with
light or under-	symbol) for your printer dock. Do not use inkjet paper.
exposed	■ Load the paper with the Kodak logo facing down. Reload the paper, if
	necessary (page 4).
	■ Turn the flash off, then take the picture. See your camera user’s guide for
	details.
	■ Adjust the exposure compensation on the camera, then take the picture.
	See your camera user’s guide for details.
	■ Move so the distance between you and the subject is within the effective
	flash range, then take the picture. See your camera user’s guide for
	details.
	■ Edit the picture using Kodak EasyShare software on your computer. See
	the EasyShare software Help for details.
Print is too dark,	■ Reposition the camera for more available light, then take the picture. See
overexposed, or	your camera user’s guide for details.
discolored	■ Use fill flash or change your position so light is not behind the subject,
	then take the picture. See your camera user’s guide for details.
	■ Turn the flash on, then take the picture. See your camera user’s guide for
	details.
	■ Adjust the exposure compensation on your camera, then take the picture.
	See your camera user’s guide for details.
	■ Move so the distance between you and the subject is within the effective
	flash range, then take the picture. See your camera user’s guide for
	details.
	■ Edit the picture using Kodak EasyShare software on your computer. See
	the EasyShare software Help for details.
	■ Move the printer dock from direct sunlight; operate in a
	temperature-controlled environment.
	■ Do not block the cooling vents on your printer dock; keep them clean
	(page 1).

44 www.kodak.com/go/support