Kodak G600 manual Inside the printer dock, Try the following

		Troubleshooting
If...	Try the following
Printing stops	IMPORTANT: Use only Kodak color cartridge & paper kits (with
during mid-print		symbol) for your printer dock. Do not use inkjet paper.
(paper stops	■ Check the paper:
feeding and	1	Remove the paper-tray (page 6).
Paper light
	2	Check the paper slot on the back of the printer dock.
glows red)
	3	Remove loose paper from the printer dock. If paper is jammed, see
		page 41.

4Carefully "fan" the paper to keep the sheets from sticking together.

5Reload the tray. Do not load more than 30 sheets of paper (see upper limit line, , inside tray).

6 Re-install the tray, then press to resume printing.

■Clean the paper-feed rollers (page 39).

Print is smudged	■ Fingerprints may be on glossy side of paper. Handle paper by the edges
	(page 2).
Print is spotted	■ Check for dirty paper; wipe paper gently with a dry, lint-free cloth to
	remove dirt. For excessive dirt or debris, thoroughly clean the paper-tray,
	and load new paper (page 4). Check and clean the paper-feed rollers
	(page 39).
	NOTE: Keep paper in the original protective wrap and remove and close the paper-tray
	and paper-tray door to keep dust and debris from collecting on the paper or
	inside the printer dock (page 6).

www.kodak.com/go/support 43