Sony KV-G142M Board Adjustment After IC003 Memory Replacement, Picture Distortion Adjustment

KV-G14M2

RM-869

5-3. A BOARD ADJUSTMENT AFTER IC003

(MEMORY) REPLACEMENT

1.Enter to Service Mode.

2.Press commander buttons 5 and - (Data Initialize), and 2 and - (Data Copy) to initialize the data.

3.Call each item number, and check if the respective screen shows the normal picture.

In case some items are not well-adjusted, give them fine adjustment.

Write the data per each item number ( MUTING + -).

4.Select item numbers “3E” (OP0), “3F” (OP1) and “40” (OP2) and respectively set the bit per model with command buttons

3 and 6.

5.Press commander buttons 8 and - (Test Normal) to return to the data that was set on the shipment from the factory.

(= Cancel Service Mode.)

5-4. PICTURE DISTORTION ADJUSTMENT

Item Number 00 – 08

00 HSF (H SHIFT)

01 HSZ (H SIZE)

02 PAP (PIN AMPLITUDE)

03 CNP (CORNER PIN)

04 TLT (TILT)

05 VSL (V SLOPE)

06 VAP (V AMPLITUDE)

07 SCR (S CORRECTION)

08 VSF (V SHIFT)

– 22 –