Item | Adj. | Data | Initial | Note for Different Data | Function | Device | |
No. | Item | Range | Data | ||||
|
|
| |||||
|
|
|
|
|
|
| |
37 | OFM | 00 |
| RGB Output Time (AC OFF) | Other Control | ||
38 | OSH | 0A |
| OSD H POSITION | Other Control | ||
39 | DSK | 00 |
| D/K Stereo enable/disable | TDA8375 | ||
3A | MUT | 00 |
| Muting on/off at No. Sync | Other Control | ||
3B | ABL | 00 |
| Bright ABL Switch | Other Control | ||
3C | SCM | 00 |
| SECAM Trap active/inactive | Other Control | ||
3D | FBT | 01 |
| FBT L/S C/M stract/plain | Other Control | ||
3E | OP0 | 4F |
| Optional Flags 0 (see below) | Other Control | ||
3F | OP1 | 0F |
| Optional Flags 1 (see below) | Other Control | ||
40 | OP2 | 00 |
| Optional Flags 2 (see below) | Other Control | ||
|
|
|
|
|
|
|
NOTE
• Note for Different Data Those are the standard data values written on the microprocessor. Therefore, the data values of the modes are stored respectively in the memory.
In case of a device replacement, adjustment by rewriting the data value is necessary for some items.
•50 .............. 50 Hz data
•60 .............. 60 Hz data
•Note for Different Data listed on the adjustment item table are reference values, therefore it is different for every model.
– 20 –