Chapter 1: Connections & Setup
Complete the Initial Setup
The menu systems in your TV/DVD allow the unit’s features to work properly. You’ll need to set a few
important menu items the first time you turn on your TV/DVD.
MAIN M E NU
SELECT VIDEO
S E T P IC TU R E
AUTO - PROGRAM
ANTENNA INPUT
ANTENNA
AIR
STD
IRC
HRC
Tip
You can also program the available channels by pressing the AUTO PROGRAM button on the remote. You still need to set the ANTENNA INPUT in the menu for the type of signal you have first, however.
Complete Auto Channel Search
This part of the setup allows the TV to search for all channels viewable through your antenna or cable TV system. This is sometimes called auto programming.
1.Make sure the remote is in the TV mode by pressing the TV button.
2.Press MENU (the Main menu appears).
3.Press the down arrow button until ANTENNA INPUT is highlighted, and press ENTER (the ANTENNA menu appears).
4.Press the down arrow button to highlight AIR (for an
ENTER.
5.Press MENU again (the Main menu appears).
6.Press the down arrow button until
Once the search is complete, you can begin watching TV. To add or delete any channels, go to page 33.
Chapter 1 | 13 |