RCA 12L500TD manual Loading and Playing Discs, To Load and Play a Disc

Chapter 2: Playing Discs

Loading and Playing Discs

Before you load a disc, make sure that it is compatible with the player. Note that the following discs CANNOT be used with this player:

•Laserdisc

•CD-I, CD-ROM, DVD-ROM

•MiniDisc

•CD-G discs play audio only, not graphics

To Load and Play a Disc

1.Press the POWER button to turn on the unit. Then make sure the unit is in DVD mode (press the SOURCE button to change modes).

2.Insert the disc into the disc slot on the top of the unit. Make sure the disc’s label is facing you (double-sided discs have content on both sides, so you can place either side toward you).

The player reads the disc’s table of contents, and then one of following happens depending on how the disc was programmed:

•No disc menu appears, a screen saver is displayed.

•The disc menu appears.

•The disc menu appears on the screen when you press PLAY.

•The disc starts playing automatically.

If no picture or screen saver is displayed, press the SOURCE button to put the player in DVD mode.

To Eject a Disc

Press the EJECT button to eject a disc. If you want to return to normal TV viewing, press SOURCE to change to TV mode.

18 Chapter 2