Chapter 3: DVD Menus
OSD (On-Screen Display) Language
Use this feature to change the language for the player’s
1.Make sure the remote is in DVD mode by pressing the DVD button.
2.Press SETUP (the SETUP MENU appears).
3.Press the down arrow button until OSD LANG is highlighted (the
4.Press the right arrow button to access the OSD LANG options.
5.Press the up or down arrow button to highlight your preferred language.
6.Once you have chosen the language, press ENTER.
7.Press SETUP to exit the SETUP MENU.
Default
Use the Default feature to reset ALL menu settings to the factory defaults.
1.Make sure the remote is in DVD mode by pressing the DVD button.
2.Press SETUP (the SETUP MENU appears).
3.Press the down arrow until DEFAULT is highlighted (RESET appears).
4.Press the right arrow to highlight RESET, then press ENTER.
5.Press SETUP to exit.
Chapter 3 | 29 |