Adding More HDP50 Units

Adding More HDP50 Units

Follow these steps to add more HDP50 units to your setup.

1.Plug the additional HDP50 unit into an electrical outlet close to the device you want to connect to the Internet. The Power indicator on the front of the adapter illuminates.

Important: The Powerlink units work best when plugged directly into an electrical outlet. Do not plug them into a surge protector, plug strip, or extension cord.

2.Plug one end of an ethernet cable (not included) into the network in jack on the Internet-capable device. Plug the other end into the ethernet jack on the bottom of the HDP50 units.

Within moments, the Link indicators on the additional unit should start blinking. If it's blinking green or orange, your Internet-capable device is now connected to your Internet connection. If the Link indicator blinks red or does not illuminate at all, see the Troubleshooting section in this manual for possible solutions.

Note: For multiple network and advanced set up tips, please visit www.rcaaccessories.com.