Pioneer PRO-730HDI, PRO-530HDI manual Front Panel Functions

Page 20

FRONT PANEL FUNCTIONS

A flip-down door conceals the INPUT 4 jacks. Push gently and release, to open the door. To close the door, lift it back up into place.

NOTE:

If you accidentally pull the door, it may not shut properly. Push the door back in to shut it.

1POWER STANDBY/ON indicators

red: STANDBY

green: when lit; ON

when flashing; power management in operation

2MAIN POWER (OFF/ON) button

If the button is OFF, the power of the monitor is shut off and 3 STANDBY/ON button on the monitor or TV power on the remote control will not function. Pressing the button again will turn the monitor ON and the monitor enters the standby mode. In the standby mode, you can turn on the monitor using the 3 STANDBY/ON button on the monitor or TV power on the remote control.

3POWER ( STANDBY/ON) button

Switches the monitor between on and standby (note that the monitor consumes a small amount of power (0.5 W) in standby mode.

4INPUT SELECT and SET button

Press to select your program source. Each press of the INPUT SELECT button changes the selection to the next source.

INPUT6 TV INPUT 1

INPUT 5INPUT 4INPUT 3 INPUT 2

While the menu is displayed, it performs the same operation as the SET/ENTER button on the remote control.

5CHANNEL +, – and , \ buttons

Press plus (+) or minus (–) to tune to a higher or lower channel. Only the preset channels can be tuned in using these buttons. Press to select or adjust items on the menu screen.

6MENU button

Press to turn the menu on.

Press again to return to normal TV screen.

7VOLUME +, – and », « buttons

Press plus (+) button to increase the volume, press minus (–) button to decrease it.

Press to select or adjust items on the menu screen.

1

STANDBY ON

Interior of the door

20

2

3

4

5

6

MAIN POWER

STANDBY/ON

SELECT

POWER

INPUT

CHANNEL

MENU

MENU

MENU

SET

ACCESS

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PRO-730HDIPRO-530HDI Reference Theater mode and PRO mode Fully Illuminated Remote Control UnitProgressive Scan/HDTV monitor Dual System Component Input for NTSC/ ProgressiveIntroduction Important NoticeImportant Safety Instructions and Warnings For Your Personal SafetyProtection and Location of Your Hdtv Projection Monitor For Servicing and Modification Operation of Your Hdtv Projection MonitorIf the Hdtv Projection Monitor does not Operate Properly Contents HOW to USE These Operating Instructions Installing the Monitor Installation PrecautionsUsage Guidelines & Precautions Operating PrecautionsHOW to Attach the Provided Frame Cover Trims shortFrame Covers Trims longHOW to Remove the Protective Screen Remove the left, right, upper, and lower frame coversRemove the protective screen from the lower panel frame Remove the screws from the lower panel frameBefore USE UHF VHFInserting batteries into the remote control unit Remote control operation rangeBattery replacement Basic OperationsConnecting the Antenna Connecting VHF/UHF antennaConnecting VHF/UHF antenna with VCR Connecting the Catv converterConnecting the Catv converter with VCR Connecting VHF/UHF antenna and Catv converterVHF antenna UHF antenna Mixer Cable TV Catv converterConnecting VIDEO/AUDIO Equipment Video movie, etc SAT tuner Digital tunerOperations DVD/DVRRear panel VCRRGB Input jack Composite Video Input jacksVideo Input jacks Component Video Input jackDigital Input jacks MONITOR/TV Output jacksFront Panel Functions Reset button VolumeMuting OFF Picture Mode STD Surround OFF Stable Volume OFF Screen Scan ModeRemote Control Unit Functions ~ Sleep timer button @ VOL volume +, buttonsSPLIT/SEARCH screen buttons = Display buttonTurn on the Main Power button To Watch TVBest Horizontal and Vertical Viewing Angle Select by pressing the number button ExampleAuto power off function BasicCable Catv Channel Assignment Table To turn off the soundPicture adjustment menu See Checking the MenuSelect Use arrow key to switch function on menu screen Closed Caption menu SeeSET ENDAuto Channel Preset Select Auto Channel PresetSelect TV Or \button and then pressing «Select TV/CABLE Mode Select Auto Preset StartAuto Channel Preset starts AIR or CatvConvergence Adjustment Select scan modeMove the red line onto the green line Move the blue line onto the yellow lineMove the vertical line Move the horizontal lineRating No ONE 17 and Under AdmittedNot Rated TV-Y TV-Y7Basic Functions Canadian Rating SystemChildren GeneralSetting the Program Blocking Level Enter a passwordOr \ button and then pressing « WaySet Block to on Select U.S.A. Rating System orSelect and confirm the rank of the TV Parental Guidelines Go to stepAfter setting, press Menu to turn the menu off French RatingPress the SET/ENTER button on the remote control « BlockChanging Password Enter current passwordEnter new password Setting Screen Size Changing Screen SizeFunctions Press the Screen Size buttonTo Adjust the Screen Position Adjust the screen positionAdjustable range Cinema Wide mode Zoom modeAfter adjusting, press Menu to turn the menu off Adjustable range Digital 31K -10 to 10 Digital 33K -15 toMaking Notes on Program Content Freeze screen MULTI-SCREEN FunctionPress the Split button Press the Freeze buttonPress the Search button ScreenSelect Mode Closed Caption Decode FunctionSelect Channel ADD/DEL Changing Channel SET UPChannel Preset Select Setting , then select ADD addition or DEL deletion Select Channel , then select a channelInput the rest of the characters Other channelsMenu off To set Favorite Channel SET UPSelect Favorite Channel Select number Select antennaSelect the channel To set a button of a different color, repeat steps 4 toPicture Adjustments Recall the Desired SettingsUsing the or \ button and then Select Mode in the same wayFor User mode Storing the SET Picture Quality in MemorySelect the input source and show the image on the screen Press Menu and select PictureTurn the menu off To Adjust the Picture QualitySelect the adjustment item Other Picture Quality Adjustments SelectTo adjust PureCinema To adjust Color TempSelect the desired PureCinema mode Select PureCinemaTo adjust 3D Y/C Level To adjust 3D NR LevelSelect 3D Y/C Level Select the desired levelTo adjust Scan Velocity Modulation SVM To adjust Flesh ToneSelect SVM Select Flesh ToneTo adjust Black Enhance To adjust Sharp EffectSelect Black Enhance Select Sharp EffectTo adjust Luminance Transient Improvement LTI To adjust GammaSelect LTI Select GammaTo adjust Contrast EXP = To adjust Sharp ModeSelect Sharp Mode Select Contrast EXP~ To adjust White Balance Select White BalanceChanging Scan Mode Change Scan ModeSound Adjustments Select the desired audio modeWatching Stereo and Bilingual Programs Select MTS in the same wayTo Adjust the Sound Quality Refer to Select the adjustment itemAdjust by pressing 2or 15 toRefer to Select Surround To Select the Desired Surround ModeSelect the desired Surround mode Set Stable Volume to on To Adjust Stable VolumeRefer to Select Stable Volume Select Digital Interface Digital InterfacePure Digital Picture Select Select Picture SelectPicture Setup Select Picture SetupTYPE1 TYPE2Set Sound Select to Auto Sound SelectSelect Sound Select Power Management Select Power ManagementSelect the adjust point Adjust the red lineConvergence adjustment may be fined-tuned here Select ADJ MULTI-POINTAdjust the blue line Connection with Receiver Various FunctionsNormal ..... The Monitor sound is output from the speaker Select the Speaker modeSelect Speaker Select the Audio OUT mode Select Audio OUTDVD/DVR VCR Press Menu and select SET UP Select System ModeSwitch the System Mode Unless required, set the System Mode to OFFConnecting the System Remote To other units bearing the Î markRemote Code SET UP Recalling Other Manufacturers Preset Remote Control CodesAt the same time, press the Edit button and number button Select the desired manufacturerManufacturers preset remote control codes GE3 YamahaYAMAHA2 YAMAHA3To Learn Remote Control Codes Example To learn the VCR power to turn onAt the same time, press the Learn button and number button Before operationDVD .......... Source POWER, RETURN, ¢ StatesCH RETURN, DTV/SAT INFO, DTV/ SAT Guide SET/ENTER, MENU, DVD TOP MenuUsing the TV Remote Control Unit to Control Other Devices Remote Control Unit Setting ButtonsMode switch EDIT/LEARN buttonCH channel +, buttons Source Power buttonCable Control Buttons SAT Control Buttons Select/Set buttons SET/ENTER, , \, », «SAT Info button Menu buttonDTV Control Buttons VCR Control Buttons 3PLAY button1REW button ¶REC button Starts recording 7STOP buttonDVD/DVR Control Buttons Select/Set buttons SET/ENTER, , \, », « DVD onlySound adjustment menu See Screen adjustment menu SeeSET UP menu See Menu IndexConvergence menu See pages 30 Channel SET UP menu SeeOthers Troubleshooting Symptom CAUSE/REMEDY PagesSymptom Cause Specifications AccessoriesDisplay and amplifier section Tuner sectionOthers Page Others Pioneer Corporation 03G00000

PRO-530HDI, PRO-730HDI specifications

The Pioneer PRO-730HDI and PRO-530HDI are innovative professional displays designed for high-definition performance in various installation environments. Both models are part of Pioneer's push towards offering advanced technology for professional applications, ensuring that users experience unparalleled image quality and reliable performance.

The Pioneer PRO-730HDI features a 73-inch screen, providing an expansive viewing area for large spaces such as conference rooms, retail environments, and public viewing areas. The PRO-530HDI offers a slightly smaller display at 53 inches, catering to more intimate settings while still delivering impressive visuals. Both displays boast a native resolution of 1920x1080 pixels, presenting sharp and clear images that are essential for professional presentations and media display.

One of the standout characteristics of both models is their incorporation of high-brightness capabilities, making them suitable for environments with high ambient light. The PRO-730HDI and PRO-530HDI utilize advanced LCD panel technology which ensures vibrant colors, deep blacks, and impressive contrast ratios. This technology allows users to rely on these displays for accurate color reproduction, making them ideal for graphic design, video production, and digital signage.

Connectivity is a vital consideration for professional applications, and these displays do not disappoint. Both models support multiple input options, including HDMI, DisplayPort, and VGA, offering versatility in connecting a range of devices. Furthermore, the models come equipped with built-in speakers, simplifying setup in environments where external audio systems may not be immediately available.

The Pioneer PRO series is designed with longevity and reliability in mind. The displays are built with robust materials, suitable for continuous operation, and are equipped with features that protect against overheating and other potential issues during extended use. They also include advanced cooling systems to maintain performance during long hours of operation.

For ease of use, the PRO-730HDI and PRO-530HDI also come with user-friendly interfaces, allowing for intuitive navigation through various settings and configurations. Remote control functionality further enhances user experience, enabling quick adjustments and setup changes from a distance.

In summary, the Pioneer PRO-730HDI and PRO-530HDI deliver exceptional performance tailored to professional needs. With their impressive screen sizes, high-resolution displays, and advanced connectivity options, these models stand out as top-tier choices for professionals requiring quality, reliability, and versatility in their display solutions.
Top Page Image Contents