Pioneer PRO-730HDI SAT Control Buttons, Select/Set buttons SET/ENTER, , \, », «, SAT Info button

REMOTE CODE SET UP

Mode switch

1

2

3

4

5

SAT CONTROL BUTTONS

CABLE and SAT cannot be selected at the same time.

When SAT is preset by REMOTE CODE SET UP, the remote control unit buttons will function as shown below.

•When a satellite broadcast tuner is connected to the Monitor, press the input selector button that has the same number as the connected input terminal and set the mode switch to CBL/SAT.

The tuner can be operated using buttons 1 to 8.

•Satellite broadcast tuners which are made by other makers and are not preset can also be operated with the remote control unit if buttons 1 to 8 have learnt the functions (see page 84).

	1 Direct channel selection buttons
6	Press the button (or buttons) that corresponds to the
	channel that you wish to watch.

2 CH (channel) +, – buttons

Press plus (+) or minus (–) to tune in a higher or lower channel.

73 Select/Set buttons (SET/ENTER, , \, », «)

, \, », «: Press the button to select items on the SAT GUIDE screen or MENU screen.

SET/ENTER: Press to activate the selected function.

84 SAT INFO button

When this button is pressed, information on satellite broadcasting will be displayed.

•Use this button to learn if necessary.

5 SOURCE POWER button

Turns the power of the SAT (digital satellite system tuner) on and off.

6CH ENTER button

Fix the selected channel with the direct channel selection buttons.

• Use this button to learn if necessary.

7MENU button

When this button is pressed, the satellite broadcasting menu screen will be displayed.

8SAT GUIDE button

When this button is pressed, the satellite broadcasting guide screen will be displayed.

88