Pioneer PRO-730HDI To Adjust the Picture Quality, Select the adjustment item, Turn the menu off

PICTURE ADJUSTMENTS

TO ADJUST THE PICTURE QUALITY

Adjust the picture quality when you want improve the quality of the picture you are watching. You can adjust the CONTRAST, BLACK LEVEL (brightness), COLOR, TINT and SHARPNESS.

CONTRAST	Adjusting the contrast to match the brightness of the
	surroundings so it is easier to watch.
BLACK LEVEL (brightness)
........................	Adjusting the picture so that night scenes, dark hair,
	and other dark parts of the screen are easier to watch.
COLOR	Adjusting it to the density you prefer. (It appears
	natural if it is a little light.)
TINT	Adjusting it so that flesh tones appear more attractive.
SHARPNESS	Normally use the center value.
	When you want a soft sensation, set it so that the
	scale moves in the minus direction.
1 Press MENU and select PICTURE .
(Refer to page 26.)
2 Select the adjustment item.
	cc
	P I C T U R E
	M O D E : U S E R ( S T D )
	C O N T R A S T	3 0
	B L A C K L E V E L	1 5
	C O L O R	– 5
	T I N T	0
	S H A R P N E S S	– 3 0
	SELECT SET	SET MENU END

NOTE:

If you are distracted by the screen display during adjustment, push the SET/ ENTER button for three or more seconds. You can do the adjustment with the screen display shut off. Pushing any button on the remote control restores the display.

		3	Adjust by pressing , \, » or «.
			• The adjusting range is –30 to 30.
			• The numerical value comes down to press and comes up to
			press \.
			• The adjustment item change to press » or «.
NOTES:
•	When picture quality has been adjusted, the user
	mode data will be overwritten with the new
	settings.		C O N T R A S T	– 1 0
• The COLOR, TINT, and SHARPNESS settings may
			ADJUST	SET SET MENU END
	not be changed when receiving RGB input (INPUT		• The set picture quality will be stored in memory as USER mode
	3).
•	The CONTRAST and BLACK LEVEL cannot be		(see page 53).
	adjusted in PRO mode.		• Repeat steps 2 and 3 for other items.
• COLOR, TINT, and SHARPNESS cannot be adjusted		4	After adjusting, press MENU to
	in PURE DIGITAL:ON state during digital signal
	input (INPUT 5, 6).

turn the menu off.

54