Pioneer DVD-U02 user service Disc Removal Method, Forced Ejection Method in Case of Emergency

Page 13

DISC OPERATION

DISC REMOVAL METHOD

¦Confirm that the BUSY indicator of the drive is not lit, and then press the Eject button (0).

¦Remove the disc after it has been ejected.

FORCED EJECTION METHOD IN CASE OF EMERGENCY

In the following cases, the disc can be removed using the forced ejection hole.

¦In case of drive trouble, when the disc can not be ejected with the Eject button or by a software command.

¦When the disc is to be removed while the power is switched off.

Confirm that the power supply of the computer is switched off and the disc loading is stopped. It takes approx. 30 seconds to stop loading a disc after switching off the power supply. While this operation, do not execute the forced ejection.

Fig. 8

¦Use an accessory pin for emergency ejection, insert it straight into the hole for forced ejection, and push strongly.

¦As the disc will be ejected approx. 5-10 mm (3/16–3/8 in.) from the disc loading slot, pull it out by fingers.

Always use the pin provided (Do not use other objects).

Do not execute the forced ejection while loading a disc, an injury or a disc damage will be caused.

Do not place anything within 12 cm (4.72 in.) in front of the unit as this may obstruct the disc ejection operation of the unit.

13

<DRC1083> En

Image 13

Contents Français EnglishItaliano Varoitus VarningWater and Moisture do not use this product near water Safety InstructionsSafety Instructions Safety Instructions Features Hardware Tour Audio output Function switchScsi interface DC InputTo Install the Drive Connecting the Drive in the Middle of a Scsi Chain Connecting the Drive AS the only Scsi Device Disc Operation Disc Setting MethodForced Ejection Method in Case of Emergency Disc Removal MethodIf data cannot be read from the DVD/CD-ROM disc TroubleshootingAccessories SpecificationsGeneral functions Audio output partInstructions DE Securite Instructions DE Securite Remarque Caracteristiques PrincipalesTour DU Materiel Commutateur de fonction Sortie audioInterface Scsi Prise d’entrée CC DC InputPour Installer LE Lecteur Avertissement Connexion DU Lecteur AU Milieu D’UNE Chaine ScsiConnexion DU Lecteur Comme Unique Dispositif Scsi Methode DE Mise EN Place DES Disques Operation DES DisquesMethode D’EJECTION Forcee EN CAS D’URGENCE Methode DE Retrait DES DisquesSi la musique ne peut pas être reproduite Guide DE DepannageFiche Technique AccessoiresGénéralités DiversSicherheitsanweisungen Vorsicht SicherheitsanweisungenHinweis MerkmaleBeschreibung DER Hardware Funktionsschalter Audioausgang AbbSCSI-Schnittstelle GleichspannungseingangInstallation DES Laufwerks Warnung Anschluss DES Laufwerks in DER Mitte Einer SCSI-KETTEAnschluss DES Laufwerks ALS Einziges SCSI-GERÄT Laden Einer DVD-/CD-ROM VerwendungVerfahren FÜR Erzwungene Entnahme in Einem Notfall Entnehmen DER CD-ROMWenn Musikwiedergabe nicht möglich ist BEI StörungenAllgemeine Funktionen Technische DatenAudio-Ausgang SonstigesIstruzioni PER LA Sicurezza Precauzione Istruzioni PER LA SicurezzaNota Caratteristiche PeculiariUN’ESCURSIONE NELL’HARDWARE Commutatore di funzionamento Uscita audio 8Interfaccia Scsi Ingresso CCInstallazione DEL Lettore Attenzione Collegamento DEL Drive ALL’INTERNO DI UNA Catena ScsiCollegamento DEL Drive Come Unico Dispositivo Scsi Metodo DI Inserimento DEL Disco Funzionamento DEL DiscoMetodo DI Espulsione Forzata in Caso DI Emergenza Metodo DI Rimozione DEL DiscoSe non si riesce a leggere i dati del DVD/CD-ROM Ricerca GuastiDati Caratteristici AccessoriFunzioni generali Parte uscita audioPioneer Electronic Corporation AFTER-SALES Service for Pioneer Products