TO INSTALL THE DRIVE
PHONES
DVD- ROM DRIVE
DVD
BUSY
Fig. 3
ÖSwitch off the power of the personal computer and remove the cover or the front panel.
ÖRemove the blank panel installed at the front of the 5.25 inch slot. Installation is not possible when there is no empty slot.
ÖInstall the fixation slide rails on the drive. (If slide rails are required, contact the shop where you bought the computer or the computer manufacturer.)
ÖInsert the drive into the slot.
ÖIf fixing is required, fix the drive according to the instruction manual for the computer.
Use mounting screws with a length of 5 mm (3/16 in.) or less.
Use of long screws may damage the drive.
Install the drive after the power supply of the personal computer has been switched off.
When the mounting screws are loose etc., the vibrations from disc rotation can generate a ripping noise, so that the screws should be tightened securely.
The drive installation method differs according to the computer type. For details, please refer to the manuals of your computer.
9
<DRC1083> En